Current Block Display - Siemens SINUMERIK 840D sl Turning Operating Manual

Introduction
2.4 User interface
Display
Rapid traverse
0.000
Override
Spindle data
Display
S
S1
Speed
Symbol
Override
Spindle utilization
rate
Note
Display of logical spindles
If the spindle converter is active, logical spindles are displayed in the workpiece coordinate
system. When switching over to the machine coordinate system, the physical spindles are
displayed.
2.4.5

Current block display

The window of the current block display shows the program blocks currently being executed.
48
Meaning
Actual feed value
If several axes traverse, is displayed for:
● "JOG" mode: Axis feed for the traversing axis
● "MDA" and "AUTO" mode: Programmed axis feed
G0 is active
No feed is active
Display as a percentage
Meaning
Spindle selection, identification with spindle number and main spindle
Actual value (when spindle turns, display increases)
Setpoint (always displayed, also during positioning)
Spindle status
Spindle not enabled
Spindle is turning clockwise
Spindle is turning counterclockwise
Spindle is stationary
Display as a percentage
Display between 0 and 100%
The upper limit value can be greater than 100%.
See machine manufacturer's specifications.
Machine manufacturer
Please refer to the machine manufacturer's specifications.
Operating Manual, 06/2019, A5E44903486B AB
Turning