Siemens SINUMERIK 840D sl Turning Operating Manual page 624

Programming technology functions (cycles)
10.6 Further cycles and functions
Procedure
Parameter
Axis
Axis dynamics
Entire load
Measurement result
display
Display mode
Moment of inertia
Mass
624
1. The part program to be edited has been created and you are in the editor.
2. Press the "Various" softkey.
3. Press the ">>" and "Adjust to load" softkeys.
The input window "Adjust to load" opens.
Description
Channel axis name
● Default
Adaptation deactivated. The default controller settings are used.
● Adapt
Adaptation activated. The controller settings are adapted to the currently active
load.
Currently active load
● Measure:
Travel movements are executed to derive the load.
● Set:
Fixed value for the moment of inertia is applied.
Measurement result display
● On
● Off
Duration of measurement result display
● autom. 8s
Disappears automatically after 8 s
● NC Start
Acknowledge the display with the <NC-START> key
Moment of inertia of the entire load
The value of the most recent measurement can be applied with the softkey "Insert
last result".
Mass of the entire load (only for linear axes with linear drives)
Operating Manual, 06/2019, A5E44903486B AB
Unit
kgm
2
kg
Turning