Parameter
X
Y
Z
X1
Y1
Z1
Note
Other additive transformations can be added to the offsets before (X0, Y0, Z0) or after (X1, Y1,
Z1) swiveling (see Section "Work offsets").
Turning
Operating Manual, 06/2019, A5E44903486B AB
Description
Axis angle
Axis angle
Axis angle
New zero point of rotated surface
New zero point of rotated surface
New zero point of rotated surface
Working with a B axis (only 840D sl)
The sequence of the axes can be inter‐
changed as required using the Select
key.
17.4 Swiveling
Unit
Degrees
Degrees
Degrees
mm
mm
mm
881