Traversing Axes By A Variable Increment; Default Settings For Manual Mode - Siemens SINUMERIK 840D sl Operating Manual

Setting up the machine
2.6 Manual mode
2.6.3

Traversing axes by a variable increment

Proceed as follows
2.6.4

Default settings for manual mode

Specify the configurations for manual mode in the "Settings for manual operation" window.
Presettings
Settings
Type of feedrate
Default feedrate G94
Default feedrate G95
Variable increment
Spindle speed
48
1. Select the "Machine" operating area.
Press the "JOG" key.
2. Press the "Settings" softkey.
The "Settings for manual operation" window is opened.
3. Enter the desired value for the "Variable increment" parameter.
Example Enter 500 for a desired increment of 500 μm (0.5 mm).
4. Press the "Inc VAR" key.
5. Select the axis to be traversed.
6. Press the "+" or "-" key.
...
Each time you press the key the selected axis is traversed by the set
increment.
Feedrate and rapid traverse override switches can be operative.
Description
Here, you select the type of feedrate.
G94: Axis feedrate/linear feedrate
•
• G95: Rev. feedrate
Enter the desired feedrate in mm/min.
Enter the desired feedrate in mm/r.
Enter the desired increment for axis traversal by variable increments.
Enter the desired spindle speed in rpm.
Operating Manual, 11/2006, 6FC5398-6AP10-1BA0
HMI sl Universal