Siemens SINUMERIK 840D sl Turning Operating Manual page 515

Procedure
Parameters in the "Input complete" mode
G code program parameters
Input
PL Machining plane
Milling direction
RP Retraction plane
SC Safety clearance
F Feedrate
Parameter Description
FZ Depth infeed rate
(only for G code)
Machining
● Face C
surface
● Face Y
● Peripheral surface C
● Peripheral surface Y
(only for Shop‐
Turn)
Position
● At the front (face)
● At the rear (face)
● Outside (peripheral surface)
(only for Shop‐
● Inside (peripheral surface)
Turn)
Clamp/release spindle (only for end face Y/peripheral surface Y)
The function must be set up by the machine manufacturer.
(only for Shop‐
Turn)
Turning
Operating Manual, 06/2019, A5E44903486B AB
1. The part program or ShopTurn program to be processed has been cre‐
ated and you are in the editor.
2. Press the "Milling" softkey.
3. Press the "Multi-edge spigot" and "Circular spigot" softkeys.
The "Circular Spigot" input window opens.
● Complete
mm
mm
*
Programming technology functions (cycles)
ShopTurn program parameters
T Tool name
D Cutting edge number
F Feedrate
S / V Spindle speed or constant cutting
rate
10.4 Milling
mm/min
mm/tooth
rpm
m/min
Unit
*
515