Siemens SINUMERIK 840D sl Turning Operating Manual page 730

Tool management
13.5 Tool list
Further parameters
If you have set up unique cutting edge numbers, these are displayed in the first column.
Column heading
D no.
SN
SC
You use the configuration file to specify the selection of parameters in the list.
Tool change / block search in the ShopTurn program step
If a tool is loaded in a ShopTurn program step, the corresponding M function for the coolant is
automatically issued.
After a block search, the coolant specified here is output, even if a different coolant has been
programmed, e.g. via G code, in the meantime.
References
Information on the configuration and setting up of the tool list can be found in the following
references:
SINUMERIK Operate Commissioning Manual
Icons in the tool list
Icon/
Marking
Tool type
Red "X"
Yellow triangle pointing down‐
ward
Yellow triangle pointing up‐
ward
730
Meaning
Unique cutting edge number
Cutting edge number
Setup offsets
Display of the existing setup offsets
Software option
In order to be able to manage the parameter spindle direction of rotation, cool‐
ant and tool-specific functions (M1-M4), you require the "ShopMill/ShopTurn"
option.
Machine manufacturer
Please refer to the machine manufacturer's specifications.
Meaning
The tool is disabled.
The prewarning limit has been reached.
The tool is in a special state.
Place the cursor on the marked tool. A tool tip will pro‐
vide a brief description.
Operating Manual, 06/2019, A5E44903486B AB
Turning