Equipping Multitool With Tools - Siemens SINUMERIK 840D sl Turning Operating Manual
Hide thumbs
Also See for SINUMERIK 840D sl Turning:
- Function manual (2184 pages) ,
- Programming manual (1334 pages) ,
- Commissioning manual (1102 pages)
Table of Contents
Advertisement
Tool management
13.15 Working with multitool
Note
The tool creation sequence can be defined differently.
13.15.3
Equipping multitool with tools
Precondition
A multitool has been created in the tool list.
Procedure
Equip the multitool with tools
Load multitool
Load the tool into the multitool
768
The multitool is created in the tool list.
Machine manufacturer
Please refer to the machine manufacturer's specifications.
1.
The tool list is opened.
2.
Select the required multitool, position the cursor on an empty mul‐
titool location.
3.
Press the "New tool" softkey.
4.
Using the appropriate selection list, e.g. favorites, select the re‐
quired tool.
2.
Select the required multitool, position the cursor on an empty mul‐
titool location.
3.
Press the "Load" softkey.
The "Load with..." window opens.
4.
Select the required tool.
Operating Manual, 06/2019, A5E44903486B AB
Turning
Advertisement
Table of Contents
