Troubleshooting; Error Messages - Epson STYLUS SCAN 2500 Manual

Troubleshooting

Error Messages

You can identify many common problems by looking at the Error
light and LCD panel on the control panel. If the Stylus Scan stops
working and the Error light is on or flashing, use the following
table to help diagnose and solve the problem.
Error
light
On
On
On
On
Error message
Problem and Solution
Printer Error
An unknown printer
error has occurred.
Call Service
The used ink tank is full.
Scanner Error
One of the following
scanner errors has
occurred:
The transportation lock
has not been released,
the fluorescent lamp
needs to be replaced,
or the EPSON Stylus
Scan is broken.
ADF Jam
No paper is loaded, or
paper has jammed in
the Automatic
Document Feeder.
Turn off the Stylus Scan and
contact your dealer.
Turn off the Stylus Scan and
contact your dealer.
Make sure that the
transportation lock is in the
unlocked position; then turn
the Stylus can off and back on.
If the Stylus Scan still does not
operate properly, or if this error
occurs repeatedly, consult
your dealer.
Load paper in the Automatic
Document Feeder, or turn off
and remove the jammed
paper from the Automatic
Document Feeder.
133