Epson STYLUS SCAN 2500 Manual page 47

Control panel
You can control copy, print and scan functions with the control
panel, and also check device status.
There are four control panel operation modes. LCD panel
messages and operation vary by mode.
Copy
Mode
Set-up
Mode
Status
Mode
Menu
Mode
The control panel is composed of four major parts.
Status indicators: The status of the Stylus Scan is indicated with
these two lights.
Light
Operate
Paper Size Darker/Lighter
Scan
Reduce/Enlarge B&W/Color
This is the normal mode, and in this mode the system is
ready to make a copy.
The LCD will display the following items:
Reduce/Enlarge, B&W/Color, Quality, Copies
This mode is used to change Copy settings.
Use this mode to change settings with the panel
buttons.
The system switches to this mode when the Stylus Scan
is performing an action (print, scan or copy).
Error and status messages are displayed.
Hold down the Quality and B&W/Color buttons for 3
seconds to enter this mode. It is used to set the following
items:
Status sheet, bottom margin and Metric/US select
Panel language select, Restore defaults
Status
Comes on when the Stylus Scan is on.
Flashes when warming up, receiving data, copying,
printing, scanning, replacing an ink cartridge, charging
ink, or cleaning the print head.
Quality Copies
Hold for Menu Return Item
Copy
Stop/Clear
Error
Set
Operate
43