Epson STYLUS SCAN 2500 Manual page 54

❏ If the paper is curled, make sure to flatten it or curl it slightly
in the opposite direction before loading. Printing on curled
paper may smear your printout, especially when printing
with Maximum selected as the Printable Area setting.
❏ If your printouts are smeared, change the adjust lever to the
"+" position. To change the setting, set the lever as shown in
the illustration.
Note:
❏ Don't forget to return the adjust lever to the "0" position before
printing or copying on media of standard thickness. Leaving the
lever in the "+" position may cause gaps in the printed image.
❏ When the adjust lever is in the "+" position, make sure the High
Speed setting in the printer driver's Advanced dialog box is off.
To turn this option off, you may also need to change the Print
Quality setting.
50