Epson STYLUS SCAN 2500 Manual page 32

11. The EPSON Screen Calibration utility starts automatically. In
the following window, move the slider to the right or left until
the two shades of the gray horizontal stripes match.
Note:
The gray stripes will not perfectly blend together; however, try to
make the two tones match as closely as possible.
12. Click OK to register the calibration setting. The computer
restarts automatically.
13. Turn on the Stylus Scan by pressing the P power button.
14. Plug the appropriate end of the USB cable into the USB port
at the back of the Stylus Scan. (The end that attaches to the
Stylus Scan has a different shape from the end that attaches
to the computer.)
28