Epson STYLUS SCAN 2500 Manual page 140

Color gaps
❏ Make sure your paper is not damaged, dirty, or old.
❏ Run the Head Cleaning utility to clear any clogged ink
nozzles.
❏ Check the error light and LCD panel message. If error light is
on and the LCD panel displays an Ink Out message, replace
the ink cartridge. See "Replacing Ink Cartridges" on page 115.
Blurry or smeared printout
Try one or more of these solutions.
❏ Make sure the printable side of the paper is face up in the sheet
feeder.
❏ Make sure your paper is not damaged, dirty, or old.
❏ Set the adjust lever to the "+" position, and make sure the
Media Type setting is set correctly in your printer driver.
Paper feed or paper jam problems
If the printer doesn't feed paper, feeds multiple pages, or paper
is jammed, remove and reload the stack of paper, then press the
E
load/eject button. If the jammed paper does not clear, follow
the steps below.
1. Click the EPSON Stylus Scan 2500 button on the task bar.
2. Select all print jobs and click the Cancel button.
3. Open the maintenance cover and turn off the Stylus Scan.
4. Remove all the paper inside, including any torn pieces.
5. Close the cover, turn the Stylus Scan on, and load the paper
again.
136