Siemens 7SR10 Argus Series Manual page 4

7SR10
Description of Operation
Document Release History
This document is issue 2018/07. The list of revisions up to and including this issue is:
2018/07 Twelfth Issue
2018/06 Eleventh Issue
2017/09 Tenth Issue
2017/07 Nineth Issue
2017/04 Eighth Issue
2017/03
Seventh Issue
2016/11 Sixth Issue
2015/09 Fifth Issue
2015/06
Fourth Issue
2015/03 Third Issue
2015/02
Second Issue
2013/11 First Issue
Software Revision History (7SR1002/7SR1003)
2018/05 2437H80001 R4h-2d
2017/09 2437H80001 R4d-2c
2017/04 2437H80001 R4c-2b
2016/11 2437H80001 R4b-2b
2015/09 2437H80001 R4b-2a
2015/06 2437H80001 R4b-1f
2015/03 2437H80001 R4b-1e
2015/02 2437H80001 R4b-1d
2013/11 2436H80015 R2d-1a
Software Revision History (7SR1004)
2018/06 2437H80008 R4h-1a
The copyright and other intellectual property rights in this document, and in any model or article produced from it
(and including any registered or unregistered design rights) are the property of Siemens Protection Devices
Limited. No part of this document shall be reproduced or modified or stored in another form, in any data retrieval
system, without the permission of Siemens Protection Devices Limited, nor shall any model or article be
reproduced from this document unless Siemens Protection Devices Limited consent.
While the information and guidance given in this document is believed to be correct, no liability shall be accepted
for any loss or damage caused by any error or omission, whether such error or omission is the result of
negligence or any other cause. Any and all such liability is disclaimed.
©2018 Siemens Protection Devices Limited
Operating system upgrade
Data Communications improvements
Minor modification in Analog
Support for Reydisp manager tool
Addition of AR variants
81THD function added
Addition of non-directional SEF device variants
First Maintenance
First Release
First Release
7SR10 Description of Operation