Adjusting The Fabric Deflector - DURKOPP ADLER 827 Service Instructions Manual

Puller

15.5 Adjusting the fabric deflector

Proper setting
The fabric deflector keeps the sewing material from entering into the slot.
The fabric deflector abuts closely on the carrier roller, leaving just enough
space for the carrier roller to move freely.
Important
If using a steel carrier roller, you need to make sure to remove the fabric
deflector.
Fig. 52: Adjusting the fabric deflector
(1) - Fabric deflector
To adjust the fabric deflector:
1. Loosen the screw (2).
2. Adjust the fabric deflector (1).
 The fabric deflector abuts closely on the carrier roller, leaving just
3. Tighten the screw (2).
Service Instructions 827/827-M - 01.0 - 05/2019
①
②
enough space for the carrier roller to move freely.
(2) - Screw
71