Adjusting The Stitch Count Before The Carrier Roller Is Lowered - DURKOPP ADLER 827 Service Instructions Manual

19.2 Adjusting the stitch count before the carrier roller
To adjust the stitch count before the carrier roller is lowered:
1. Press the
2. Enter the parameters for the s.p.m. before the carrier roller is lowered:
3. Use the buttons A+, B+, C+ and D+ to enter the desired s.p.m.
4. Press the
5. To switch to sewing mode, press the
For additional parameter settings, refer to  Parameter list.
92
is lowered
button.
t 14 03.
button to save the setting.
Programming
button.
Service Instructions 827/827-M - 01.0 - 05/2019