Maintenance
20 Maintenance
This chapter describes maintenance work that needs to be carried out
on a regular basis to extend the service life of the machine and achieve
the desired seam quality.
Maintenance intervals
Work to be carried out
Machine head
Removing lint and thread remnants
Cleaning the motor fan mesh
Check the oil level
Check the hook lubrication
Checking the toothed belt
Pneumatic system
Check the water level in the pressure controller
Cleaning the filter element
Service Instructions 827/827-M - 01.0 - 05/2019
WARNING
Risk of injury from sharp parts!
Punctures and cutting possible.
Prior to any maintenance work, switch off the
machine or set the machine to threading mode.
WARNING
Risk of injury from moving parts!
Crushing possible.
Prior to any maintenance work, switch off the
machine or set the machine to threading mode.
Operating hours
8
40
160
500
93