DURKOPP ADLER 827 Service Instructions Manual page 113

Troubleshooting
Service Instructions 827/827-M - 01.0 - 05/2019
Code Possible cause
6361 No external EEprom connected
6362 No valid data on internal EEprom
(internal data structures are not
compatible with the external data
storage device)
6363 No valid data on internal and
external EEprom (software version
is not compatible with the internal
data storage device, emergency
operating features only)
6364 No valid data on internal EEprom
and no external EEprom connected
(the internal data structures are not
compatible with the external data
storage device, emergency
operating features only)
6365 Internal EEprom defective
6366 Internal EEprom defective and
external data not valid (emergency
operating features only)
6367 Internal EEprom defective and
external EEprom not connected
(emergency operating features
only)
7202 DACextension box boot error
7203 Checksum error during update
7212 DA stepper card 1 boot error
7213 Checksum error occurred while
updating DA stepper card 2
7222 DA stepper card 2 boot error
7223 Checksum error occurred while
updating DA stepper card 2
Remedial action
• Connect machine ID
• Check machine ID connection
• Switch off the control, wait until
the LEDs are off and then switch
on again
• Perform a software update
• Check machine ID connection
• Switch off the control, wait until
the LEDs are off and then switch
on again
• Perform a software update
• Check machine ID connection
• Switch off the control, wait until
the LEDs are off and then switch on
again
• Perform a software update
• Replace control
• Replace control
• Replace control
• Check connection cables
• Perform a software update
• Replace DACextension box
• Check connection cables
• Perform a software update
• Replace DACextension box
• Check connection cables
• Perform a software update
• Replace DACextension box
• Check connection cables
• Perform a software update
• Replace DACextension box
• Check connection cables
• Perform a software update
• Replace DACextension box
• Check connection cables
• Perform a software update
• Replace DACextension box
111