Adjusting the feed dog
9.2.4 Adjusting the compensating weight
Fig. 28: Adjusting the compensating weight
(1) - Threaded pin
(2) - Compensating weight
Proper setting
1. Move the handwheel into the 210° position.
The threaded pin for the compensating weight is parallel to the base
To adjust the compensating weight:
1. Move the handwheel into the 210° position.
2. Unscrew the threaded pin (1) and leave the allen key inserted in
3. Turn the compensating weight (2) such that the threaded pin (1) is
4. Tighten the threaded pin (1).
Service Instructions 827/827-M - 01.0 - 05/2019
①
②
plate.
the threaded pin.
parallel to the base plate (3).
Use the allen key inserted in the threaded pin as a means of orientation.
(3) - Base plate
③
43