Disassembling And Assembling The Throat Plate - DURKOPP ADLER 827 Service Instructions Manual

Working basis

3.3.6 Disassembling and assembling the throat plate

Fig. 6: Disassembling and assembling the throat plate
(1) - Screws
(2) - Throat plate
Disassembling the throat plate
To disassemble the throat plate:
1. Open the throat plate slide ( p. 18).
2. Loosen the screws (1).
3. Disassemble the throat plate (2).
Assembling the throat plate
To assemble the throat plate:
1. Insert the throat plate (2).
2. Tighten the screws (1).
3. Close the throat plate slide.
Service Instructions 827/827-M - 01.0 - 05/2019
①
②
Ensure that the bobbin case nose (3) is in the cutout of the throat plate.
③
(3) - Bobbin case nose
①
19