Adjusting The Fabric Clamping Pressure - DURKOPP ADLER 580 Operating Instructions Manual

Single-chainstitch automat for stitched eyelets
Hide thumbs Also See for 580:
Table of Contents

Advertisement

8.7

Adjusting the fabric clamping pressure

28
2
1
Caution: Danger of injury!
Turn the main switch off.
Adjust the fabric clamping pressure only with the machine switched off.
Standard checking
The clamping pressure should be adjusted in such a way that the
sewing material is clamped safely and tightly.
Please observe that the sewing material is not damaged by a too high
pressure.
The standard pressure amounts to 4 bar.
Correction
Switch the machine off and tilt it up.
Loosen the counter-nut 3 at the regulator 2 so that the scale 4 is
visible.
Adjust the pressure with the Allen key 1.
Tighten the counter-nut 3.
Check the clamping of the material.
2
4
3

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents