Omron Sysmac NYB-0 Series Hardware User Manual page 209

BIOS - Security
Provides security information like BIOS Password and HDD information.
Security setting adjustments should only be performed by the engineer
in charge that possesses a thorough understanding of the security set-
tings. Selecting non-recommended security settings can put your sys-
tem at risk.
Changeable BIOS Security parameters and their factory default values:
BIOS Password
BIOS Lock
HDD Security
Configuration
Secure Boot Menu
BIOS - Save & Exit
Provides the possibility to leave the BIOS with or without saving changes.
Save & Exit Parameters: Disabled.
• Save Changes and Exit
Changed settings are saved and the Operating System starts with the changed settings.
• Discard Changes and Exit
Changed settings are not saved and the Operating System starts with the unchanged settings.
• Save Changes and Reset
Changed settings are saved and the Box PC restarts using the changed settings.
• Discard Changes and Reset
Changed settings are not saved and the Box PC restarts with the unchanged settings.
• Save Changes
Changed settings are saved and the BIOS setup stays open.
• Discard Changes
Changed settings are reverted to their last saved values and the BIOS setup stays open.
• Restore Defaults
Revert all BIOS settings to factory default.
NY-series Industrial Box PC Hardware User's Manual (W553)
WARNING
Item
Diskname
Secure Boot
Secure Boot Mode
Key Management Default Key Provision
Platform Key (PK)
Key Exchange Key (KEK)
Authorized Signatures
Forbidden Signatures
Authorized TimeStamps
Appendices
Default / Remark
Empty
Enabled
Display disk parameters
Disabled
Custom
Disabled
NOT INSTALLED
NOT INSTALLED
NOT INSTALLED
NOT INSTALLED
NOT INSTALLED
A-11
A