Wall Mount Procedure - Omron Sysmac NYB-0 Series Hardware User Manual

5-3-9

Wall Mount Procedure

Use the following procedure to mount the Box PC in the wall orientation.
Additional Information
• Refer to 5-4-2 Ground on page 5-26 for grounding details.
• Refer to 3-10-1 Mounting Brackets on page 3-22 for the bracket model.
To mount the Box PC:
1
Mount the Brackets A to the Box PC C with the 6 Phillips screws B supplied with the brack-
ets.
Tighten these screws with a torque of 0.5 N·m.
The Box PC can differ depending on the product configuration.
2
Mount the Box PC with the brackets in position.
• Drill the four holes at the location where the Box PC with brackets will be mounted.
Refer to 4-1-9 Bracket Specifications on page 4-17 for details.
• Position the Box PC with bracket in the mounting location.
• Insert screws through the bracket into the mounting surface.
Note that these screws are not in the scope of delivery.
• Tighten all four screws with a torque of 0.5 N·m.
The Box PC is mounted.
NY-series Industrial Box PC Hardware User's Manual (W553)
C
B
A
5 Installation
5
5-25