Connecting To The Instrument Other Than 4294A - Agilent Technologies 16047E Operation And Service Manual

Installation Guide
Connecting the 16047E

Connecting to the instrument other than 4294A

When connecting the 16047E to any instrument other than the 4294A, remove the
four fastening screws as shown in Figure 1-2.
Figure 1-2 Locations of fastening screws
Step 1. Set the 16047E test fixture to the UNKNOWN connectors on the instrument by
gradually coupling the four BNC connectors and fastening screws of the fixture
with the connectors of the instrument until they come to complete contact. Be sure
to align the grooves on both sides.
Step 2. Secure the two BNC connectors of the fixture by turning clockwise their rotation
levers.
Figure 1-3 Connecting the fixture to the instrument
12
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Chapter 1