Table of Contents
Advertisement
Operation
DUT Measurement
DUT Measurement
Before performing DUT measurement, open and short compensation should be
done as described in the previous sections.
1. Loosen the electrode securing screws of both sides so that DUT leads are
2. Fasten both of the securing screws.
NOTE
Do not fasten the screws too tightly to prevent the electrodes from damaged.
Figure 3-2
Performing DUT Measurement
3. Follow the instruction manual that came with your instrument to measure your
22
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
caught in the electrodes.
DUT.
Chapter 3
Advertisement
Table of Contents
