Precor GEN06 Series Service Manual page 39

SYSTEM SETTINGS
MENU
» Configuration
» Status
» IP Address
®
» Preva Server
Display menu
» Default Language
» Measurement
Units
» Standby Mode
Delay
» Browser
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
To connect to a network:
1. Select Network Type > Wired (or Wi-Fi) > Go.
2. Select Configure > Configuration > select a network from
the list and enter your credentials to access that network.
3. Select Back to save settings and return to the Con-
nectivity screen.
menu: System Settings > Connectivity> Configuration
Settings: Automatic (recommended), Manual
Default: Automatic
Specifies internet connection mode.
menu: System Settings > Connectivity > Status
Range: Connected, Not Connected
Specifies internet connection status.
menu: System Settings > Connectivity> IP Address
Specifies console internet IP address.
menu: System Settings > Connectivity> Preva
Specifies Precor Preva server URL (na.preva.com).
menu: System Settings > Display
Console default display configuration settings: language, units,
standby delay, .browser and news reader on/off.
menu: System Settings > Display > Default Language
Default: English
Specifies the default language.
menu: System Settings > Display > Measurement Units
Range: US Standard, Metric
Default: US Standard
Specifies the default measurement units.
menu: System Settings > Display > Standby Mode Delay
Range: 5, 10, 15. 30, 60 minutes
Default: 15 minutes
Specifies the idle wait time before entering standby mode.
menu: System Settings > Display > Browser
Range: ON/OFF
4 Standard Service Menus
Touchscreen Console Standard Service Menus
DESCRIPTION
®
Server
Page 32