Zoom Rooms - Crestron TSW-560 Product Manual

Zoom Rooms
To set up the Zoom Rooms conferencing control or Zoom scheduling application on the touch
screen:
NOTE: A Zoom Rooms account is required to use this application. For more information and to
register an account, visit www.zoom.us.
1. Access the touch screen web configuration interface. For more information, refer to
Configuration (on
2. Navigate to Settings > Applications.
3. Select Zoom Rooms from the Application Mode drop-down menu.
Settings Tab - Applications (Zoom Rooms)
4. Configure the following Zoom Rooms settings as needed. These settings may be edited at
any time.
Zoom Room Page Flip: Toggle the switch to enable or disable the user's ability to
l
toggle between Zoom Rooms mode and a custom user project.
Time Out Control: Set the automatic flip behavior for the Zoom Rooms application,
l
which occurs after the duration set in the Flip Back Time field.
Disabled: When selected, automatic flip behavior is disabled.
o
Flip To Project: When selected, the screen automatically flips to the user project
o
after the time out duration elapses. Press the home button (second hard key
from top right) on the touch screen to flip back to the Zoom Rooms application.
Flip To Mode: When selected, the screen automatically flips to the Zoom Rooms
o
application after the time out duration elapses. Press the home button on the
touch screen to flip back to the user project.
Flip Back Time: Enter a duration (in minutes) before the automatic flip behavior
l
occurs.
96 • TSW-560, TSW-760, and TSW-1060
page 27).
Web
Product Manual — Doc. 7927K