Specifications - Sony CMT-CP33MD Operating Instructions Manual

Specifications

Main Unit (HCD-CP33)
Amplifier section
For the U.S. model
AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL HARMONIC
DISTORTION:
With 6-ohm loads, both channels driven, from
70 – 20,000 Hz; rated 18 watts per channel
minimum RMS power, with no more than 0.9%
total harmonic distortion from 250 milliwatts to
rated output.
North American model:
Continuous RMS power output (reference):
35 + 35 watts
(6 ohms at 1 kHz, 10% THD)
Total harmonic distortion: less than 0.07%
(6 ohms at 1 kHz, 18 W)
European model:
DIN power output (Rated):30 + 30 watts
(6 ohms at 1 kHz, DIN, 230 V)
Continuous RMS power output (Reference):
35 + 35 watts
(6 ohms at 1 kHz,
10% THD, 230 V)
Music power output (Reference):
85 + 85 watts
Other models:
The following measured at 230 V AC, 60 Hz
DIN power output (rated): 28 + 28 watts
(6 ohms at 1 kHz, DIN)
Continuous RMS power output (reference):
30 + 30 watts
(6 ohms at 1 kHz, 10% THD)
The following measured at 220 V AC, 60 Hz
DIN power output (rated): 24 + 24 watts
(6 ohms at 1 kHz, DIN)
Continuous RMS power output (reference):
25 + 25 watts
(6 ohms at 1 kHz, 10% THD)
Inputs
VIDEO IN (phono jacks): voltage 250 mV, impedance 47
kilohms
Outputs
LINE OUT (phono jack): voltage 250 mV, impedance 1
kilohm
PHONES (stereo minijack):
accepts headphones of 8 ohms or
more.
SPEAKER: accepts impedance of 6 to
16 ohms.
CD player section
System Compact disc and digital audio
system
Laser Semiconductor laser ( =780 nm)
Emission duration: continuous
Laser output Max. 44.6 µW*
*This output is the value measured
at a distance of 200 mm from the
objective lens surface on the
Optical Pick-up Block with 7 mm
aperture.
Frequency response 2 Hz – 20 kHz
MD deck section
System MiniDisc digital audio system
Laser Semiconductor laser ( =780 nm)
Emission duration: continuous
Laser output Max. 44.6 µW*
*This output is the value measured
at a distance of 200 mm from the
objective lens surface on the
Optical Pick-up Block with 7 mm
aperture.
Sampling frequency 44.1 kHz
Frequency response 5 Hz – 20 kHz
Tape deck section
Recording system 4-track 2-channel stereo
Frequency response (DOLBY NR OFF)
40 – 13,000 Hz (±3 dB),
using Sony TYPE I cassettes
40 – 14,000 Hz (±3 dB),
using Sony TYPE II cassettes
Wow and flutter ±0.13% W. Peak (IEC)
0.07% W. RMS (NAB)
±0.2% W. Peak (DIN)
continued
81