1. Manuals
  2. Brands
  3. Sony Manuals
  4. Stereo System
  5. CMT-CP300
  6. Service manual

Sony CMT-CP300 Service Manual

Hide thumbs Also See for CMT-CP300:
Table of Contents

Advertisement

Quick Links

Download this manual
SERVICE MANUAL
Ver 1.0 2001. 04
• CMT-CP300 are composed of following models.
As for the service manual, it is issued for each component
model, then, please refer to them.
COMPONENT MODEL NAME
COMPACT DISK DECK
RECEIVER SYSTEM
SPEAKER SYSTEM
SPECIFICATIONS
General
Power requirements
Canadian, Mexican model: 120 V AC, 60 Hz
European model:
230 V AC, 50/60 Hz
Other models:
110 - 120 V or 220 - 240 V AC, 50/60 Hz
Adjustable with voltage selector
Power consumption
European model:
70 W
0.5 W (at the power saving mode)
Other models:
70 W
Approx. 225 × 273 × 385 mm incl.
Dimensions (w/h/d)
projecting parts and controls
Mass
Approx. 7.3 kg
Supplied accessories
Remote commander (1)
AM loop antenna (1)
FM wire antenna (1)
Batteries (2)
Design and specifications are subject to change without notice.
Sony Corporation
9-873-888-11
2001D1600-1
Audio Entertainment Group
© 2001.4
General Engineering Dept.
CMT-CP300
• Abbreviation
CMT-CP300
CND : Canadian model.
EA : Saudi Arabia model.
HCD-CP300
MX : Mexican model.
SP
SS-CCP300
PARTS LIST
Part No.
1-476-705-11 REMOTE COMMANDER (RM-SCP300)
1-501-374-11 ANTENNA, LOOP (AM)
1-501-659-61 ANTENNA (FM) (CND,EA,MX,SP)
0 1-569-008-21 ADAPTOR, CONVERSION 2P (EA,SP)
1-754-060-11 ANTENNA (FM) (AEP,UK)
4-233-757-11 MANUAL, INSTRUCTION (ENGLISH) (CND,AEP,UK,EA,SP)
4-233-757-21 MANUAL, INSTRUCTION (FRENCH,SPANISH) (AEP,SP)
4-233-757-31 MANUAL, INSTRUCTION (FRENCH) (CND,EA)
4-233-757-41 MANUAL, INSTRUCTION (SPANISH) (MX)
4-233-757-51 MANUAL, INSTRUCTION (GERMAN,DUTCH,ITALIAN) (AEP)
4-233-757-61 MANUAL, INSTRUCTION (SWEDISH,POLISH) (AEP)
4-233-757-71 MANUAL, INSTRUCTION (ARABIC) (EA)
4-233-757-81 MANUAL, INSTRUCTION (CHINESE) (SP)
4-233-758-11 MANUAL, INSTRUCTION (DANISH,FINNISH) (AEP)
4-233-758-21 MANUAL, INSTRUCTION (PORTUGUESE) (AEP)
4-235-505-01 COVER BATTERY (FOR RM-SCP300)
MICRO HI-FI COMPONENT SYSTEM
Canadian Model
: Singapore model.
Description
ACCESSORIES & PACKING MATERIALS
********************************
The components identified by
mark 0 or dotted line with mark
0 are critical for safety.
Replace only with part number
specified.
AEP Model
UK Model
E Model
Remark
Les composants identifiés par
une marque 0 sont critiques
pour la sécurité.
Ne les remplacer que par une
pièce portant le numéro spécifié.

Advertisement

Table of Contents
loading

Related Manuals for Sony CMT-CP300

Summary of Contents for Sony CMT-CP300

  • Page 1 Canadian Model AEP Model Ver 1.0 2001. 04 UK Model E Model • CMT-CP300 are composed of following models. As for the service manual, it is issued for each component model, then, please refer to them. COMPONENT MODEL NAME • Abbreviation CMT-CP300 CND : Canadian model.
  • Page 2 CMT-CP300 REVISION HISTORY Clicking the version allows you to jump to the revised page. Also, clicking the version at the upper right on the revised page allows you to jump to the next revised page. Ver. Date Description of Revision...
  • Page 3 50 - 13,000 Hz (±3 dB), The following measured at 230 V AC, 60 Hz Antenna AM loop antenna, external using a Sony TYPE I DIN power output (rated): 27 + 27 W antenna terminal cassette (6 ohms at 1 kHz, DIN)

  • Page 4: Table Of Contents

    HCD-CP300 TABLE OF CONTENTS 1. SERVICING NOTES ······················································· 4 General Power requirements North American model: 120 V AC, 60 Hz 2. GENERAL ·········································································· 5 European model: 230 V AC, 50/60 Hz Other models: 110 - 120 V or 220 - 240 V AC , 50/60 Hz 3.
  • Page 5 CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS REMPLACER CES COMPOSANTS QUE PAR DES PIÈSES SONY APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU PUBLISHED BY SONY.

  • Page 6: Servicing Notes

    HCD-CP300 SECTION 1 SERVICING NOTES SERVICE POSTION NOTES ON HANDLING THE OPTICAL PICK-UP In checking the CD block, prepare jig (extension cable J-2501-011- BLOCK OR BASE UNIT The laser diode in the optical pick-up block may suffer electrostatic break-down because of the potential difference generated by the MAIN board charged electrostatic load, etc.

  • Page 7: General

    HCD-CP300 SECTION 2 GENERAL This section is extracted from instruction manual. Main unit 1234 5~6 > wd~wk DECK A EJECT Z 5 TAPE A m/M ef 1 DISC indicator wa BASS ea DECK B EJECT Z 6 TAPE B m/M qs TAPE REC z 8 CD 1 wd DSG 4...
  • Page 8 HCD-CP300 Remote Control 1 2 3 4 wf~wh w;~wa qgqf BASS/TREBLE ql PLAY MODE wl BUTTON DESCRIPTIONS CD wj SLEEP 1 N wd DIRECTION qj STEREO/MONO qd DISC1 wf TAPE A/B wk DISC2 wg TIMER SELECT 2 . ws DISC3 wh TIMER SET 3 >...

  • Page 9: Disassembly

    HCD-CP300 SECTION 3 DISASSEMBLY • The equipment can be removed using the following procedure. Cover (upper) Front panel section Front panel section Back panel sub assy Main board Power board CD mechanism deck (CDM63K-K6BD44) Tape mechanism deck-1 Tape mechanism deck-2 Base unit (BU-K6BD44) Motor board Tray assy...

  • Page 10: Front Panel Section

    HCD-CP300 3-2. FRONT PANEL SECTION 7 Wire (flat type) 15p (CN805) 8 Wire (flat type) 17p (CN806) 6 Wire (flat type) 17p (CN801) 5 Wire (flat type) 21p (CN803) 2 Connector 2p (CN810) 1 Connector 2p (CN809) 3 Wire (flat type) 11p (CN301) 4 Wire (flat type) 11p (CN302) 9 Connector 4p (CN307) qs Screw (KTP 3 ×...

  • Page 11: Tape Mechanism Deck-2

    HCD-CP300 3-4. TAPE MECHANISM DECK-2 qd Wire (flat type) 11p qg Two damper qh Tape machanism deck qf Thwo screws (BVTTWH 2 × 6) qa Three screws (BVTP 2.6 × 12) qs Bracket (MD) 3 Cassette holder (B) 7 Wire (flat type) 11p sub assy (CN401) 4 Spring (cassette B)

  • Page 12: Main Board

    HCD-CP300 3-6. MAIN BOARD 1 Connector 9p (CN902) 5 Screw (BVTP 3 × 12) 7 Main board 2 Wire (flat type) 21p (CN304) 4 Screw (BTP 3 × 8) 3 Connector 12p (CN313) 3-7. POWER BOARD Power board 1 Screw (BTP 3 × 8) 2 Two screws (KTP 3 ×...

  • Page 13: Cd Mechanism Deck (Cdm63K-K6Bd44)

    HCD-CP300 3-8. CD MECHANISM DECK (CDM63K-K6BD44) 3 CD machanism deck (CDM63K-K6BD44) 1 Four screws (BTP 3 × 8) 3-9. BASE UNIT (BU-K6BD44) 3 Coil spring (insulator) 5 Two screws (ITB 2.6 × 8) 4 Insulator 2 Two screws (PTPWH 2.6 × 6) 6 Stopper (BU) 1 Screws, froating 3 Coil spring (insulator)

  • Page 14: Motor Board

    HCD-CP300 3-10. MOTOR BOARD 3 Two screws (BTTP 2.6 × 8) Stocker assy 4 Holder (sensor) 5 Belt 1 Rotate the cam, and up the stocker assy at the full. 8 Pulley (motor) 2 Connector 5p (CN703) 9 Motor board 6 Connector 2p (CN702) 7 Two screws (BTTP 2.6 ×...

  • Page 15: Slider (Loading)

    HCD-CP300 3-12. SLIDER (LOADING) 3 Two screws (BTTP 2.6 × 8) 2 Bracket (retainer) 4 Bracket (retainer) 8 Two gears (slider) 1 Two screws (BTTP 2.6 × 8) 7 Two screws (PTPWH M2.6) 6 Slider (loading) 3-13. STOCKER ASSY 4 Stocker assy 5 Holder (BU213) 2 Screw (BTTP 2.6 ×...

  • Page 16: Test Mode

    HCD-CP300 SECTION 4 TEST MODE [CD Ship Mode] [CD Service Mode] • This mode moves the optical pick-up to the position durable to • This mode can run the CD sled motor freely. Use this mode, for vibration. Use this mode when returning the set to the customer instance, when cleaning the optical pick-up.

  • Page 17: Electrical Adjustments

    HCD-CP300 SECTION 5 ELECTRICAL ADJUSTMENTS Mode: Playback DECK SECTION 0 dB=0.775 V MAIN board Note: Confirm each contents of this section first of all. If the results are SPEAKER terminals (SJ301) test tape not satisfied, do the adjustment. L-CH P-4-A63J Demagnetize the record/playback head with a head oscilloscope (10 kHz, –10 dB)
  • Page 18 HCD-CP300 CD SECTION Checking Location: – CD BOARD (Conductor Side) – Note: CD Block is basically constructed to operate without adjustment. Use YEDS-18 disc (3-702-101-01) unless otherwise indicated. Use an oscilloscope with more than 10 MΩ impedance. Clean the object lens by an applicator with neutral detergent when the signal level is low than specified value with the following checks.

  • Page 19: Diagrams

    HCD-CP300 SECTION 6 DIAGRAMS 6-1. BLOCK DIAGRAMS CD SECTION TUNER UNIT TU-L ST-L SYSTEM CONTROL IC601(1/2) ST-R R-CH • RCH is omitted • Signal Path TU DIN TU DOUT : FM TU CLK TU CE : CD TUNED TUNED TUNED TUNED AEP,UK ONLY : DIGITAL OUT...

  • Page 20: Block Diagram Main Section

    HCD-CP300 6-2. BLOCK DIAGRAMS MAIN SECTION INPUT SELECT TONE/VOL CONT IC101 IC301 TU L TUNER TU-L OUT2 POWER SJ301 SECTION Q330 SPEAKER MUTE MUTE +12V CD L CONT Q150 CD-L • RCH is omitted SECTION • Signal Path MUTE PJ301 Q305 R CH IC503...

  • Page 21: And Schematic Diagrams

    HCD-CP300 6-3. NOTE FOR PRINTED WIRING BOARDS AND SCHEMATIC DIAGRAMS Note on Printed Wiring Boards: Note on Schematic Diagram: • WAVEFORMS • All capacitors are in µF unless otherwise noted. pF: µµF • X : parts extracted from the component side. •...

  • Page 22: Printed Wiring Board Cd Section

    HCD-CP300 6-4. PRINTED WIRING BOARD CD SECTION • See page 19 for Circuit Boards Location. IC102 (VC) IC103 (PF) IC101 (Page 27) • Semiconductor Location Ref. No. Location IC101 IC102 IC103 Q101 Q102...

  • Page 23: Schematic Diagram Cd Section

    HCD-CP300 6-5. SCHEMATIC DIAGRAM CD SECTION • See page 19 for Wavefoms. • See page 38, 39 for IC Block Diagrams. IC B/D IC B/D IC B/D...

  • Page 24: Printed Wiring Board Tc Section

    HCD-CP300 6-6. PRINTED WIRING BOARD TC SECTION • See page 19 for Circuit Boards Location. (Page 27) IC401 IC402 • Semiconductor Location Ref. No. Location IC401 IC402 Q401 Q402 Q403 Q404 Q405 Q406 Q410 Q413...

  • Page 25: Schematic Diagram Tc Section

    HCD-CP300 6-7. SCHEMATIC DIAGRAM TC SECTION • See page 19 for Wavefoms. • See page 38 for IC Block Diagrams. IC B/D...

  • Page 26: Schematic Diagram Main Section (1/3)

    HCD-CP300 6-8. SCHEMATIC DIAGRAM MAIN SECTION (1/3) • See page 37 for IC Block Diagrams. IC B/D IC B/D...

  • Page 27: Schematic Diagram Main Section (2/3)

    HCD-CP300 6-9. SCHEMATIC DIAGRAM MAIN SECTION (2/3)

  • Page 28: Schematic Diagram Main Section (3/3)

    HCD-CP300 6-10. SCHEMATIC DIAGRAM MAIN SECTION (3/3) • See page 19 for Wavefoms. • See page 37 for IC Block Diagrams. • See page 35 for IC Pin Function Description. IC B/D IC B/D...

  • Page 29: Printed Wiring Board Main Section

    HCD-CP300 6-11. PRINTED WIRING BOARD MAIN SECTION • See page 19 for Circuit Boards Location. (Page 34) (Page 34) (Page 28) (Page 28) 21 1 IC602 • Semiconductor Location Ref. No. Location D309 D314 D319 D321 IC601 D323 D350 IC604 D805 D806 D807...

  • Page 30: Printed Wiring Board Control Section

    HCD-CP300 6-12. PRINTED WIRING BOARD CONTROL SECTION • See page 19 for Circuit Boards Location. IC605 • Semiconductor Location Ref. No. Location D811 D812 D813 D814 D815 D816 D817 D818 D820 D823 D828 D829 D830 D831 D833 (Page 27) IC605 Q809 Q810 Q811...

  • Page 31: Schematic Diagram Control Section

    HCD-CP300 6-13. SCHEMATIC DIAGRAM CONTROL SECTION...

  • Page 32: Printed Wiring Board Driver Section

    HCD-CP300 6-14. PRINTED WIRING BOARD DRIVER SECTION • See page 19 for Circuit Boards Location. IC731 IC732 IC733 IC701 MAIN BOARD CN313 (Page 27) IC751...

  • Page 33: Schematic Diagram Driver Section

    HCD-CP300 6-15. SCHEMATIC DIAGRAM DRIVER SECTION • See page 38 for IC Block Diagrams. IC B/D (Page 25)

  • Page 34: Printed Wiring Board Power Section

    HCD-CP300 6-16. PRINTED WIRING BOARD POWER SECTION • See page 19 for Circuit Boards Location. 110V - 120V 220V - 240V • Semiconductor Location Ref. No. Location D901 D903 D904 D905 D906 D907 D908 D909 D910 D911 D912 (Page 27) D913 D914 D915...

  • Page 35: Schematic Diagram Power Section

    HCD-CP300 6-17. SCHEMATIC DIAGRAM POWER SECTION...

  • Page 36: Printed Wiring Board Lcd Section

    HCD-CP300 6-18. PRINTED WIRING BOARD LCD SECTION • See page 19 for Circuit Boards Location. 6-19. SCHEMATIC DIAGRAM LCD SECTION LCD801 LIQUID CRYSTAL DISPLAY CN803 (Page 27) (Page 27) PJ301 (Page 27) (Page 27)

  • Page 37: Ic Pin Function Description

    HCD-CP300 6-20. IC PIN FUNCTION DESCRIPTION • IC601 (SYSTEM CONTROLLER) M30622MGA-A43FP Pin No. Pin Name Description LCD REQ Signal output. LCD command select signal output. AC CUT AC CUT check signal. “L”:ON,”H”:OFF REMOCON Sircs remote control signal input. SI (LCD) LCD Serial interface signal input.
  • Page 38 HCD-CP300 Pin No. Pin Name Description X-RST CD reset signal output. AMP-MUTE AMS signal output. “L”:IN,”H”:OUT. B/L CON Back light LED control signal output. AU-MUTE Audio mute signal output. “H”:IN,”L”:OUT. STBY ON Standby relay ON/OFF signal output. VOL CLK VOL CLK signal output. VOL DATA VOL DATA signal output.

  • Page 39: Ic Block Diagrams

    HCD-CP300 6-21. IC BLOCK DIAGRAMS IC101, 201 TDA7296 (MAIN BOARD) THERMAL BIPOLAR SHUTDOWN TRANSCONDACTANCE INPUT STAGE MOS GAIN & SHORT – LEVEL SHIFTING OUTPUT CIRCUIT STAGE STAGE PROTECTION STANDBY/ MUTE BOOST- STRAP 14 15 µPD7225G (MAIN BOARD) IC602 S0 – S13 , S14 –...
  • Page 40 HCD-CP300 IC401 TA8189N (TC BOARD) IC701 BA6956AN (DRIVER BOARD) METAL TAPE A CH2/A CH2/B /TAPE B – – CONTROL LOGIC VREF1 IREF VREF2 – – CH1/A CH1/B METAL GND1 IC101 CXD3017Q (CD BOARD) 59 58 57 46 45 44 Digital LRCK OP Amp PCMD...
  • Page 41 HCD-CP300 IC102 BA5974FP (CD BOARD) MUTE INTERFACE LEVEL SHIFT THERMAL SHUTDOWN INTERFACE INTERFACE IC103 CXA2581N (CD BOARD) APC-OFF (Hi-Z) RW/ROM (H/L) VOFST – – VOFST VOFST DVCC – – – – EQ ON/OFF DVCC DVCC DVCC – – – – VOFST...

  • Page 42: Exploded Views

    HCD-CP300 SECTION 7 EXPLODED VIEWS NOTE: • -XX, -X mean standardized parts, so they may • Hardware (# mark) list and accessories and The components identified by mark 0 or have some differences from the original one. packing materials are given in the last of this dotted line with mark 0 are critical for safety.

  • Page 43: Front Panel Section

    HCD-CP300 7-2. FRONT PANEL SECTION not supplied supplied supplied 73 74 supplied supplied Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks 4-232-441-01 KNOB (VOL) A-2007-973-A CONTROL BOARD, COMPLETE 4-226-047-01 NUT, HEXAGON 4-233-478-01 BRACKET (CD LID) 4-232-440-01 KNOB (BASS) 4-233-490-01 SPRING (LID) 4-232-439-01 KNOB (SELECT) X-4953-649-1 BUTTON SUB ASSY, EJECT...

  • Page 44: Chassis Section

    HCD-CP300 7-3. CHASSIS SECTION not supplied not supplied T901 not supplied not supplied CD mechanism deck not supplied Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks A-4726-203-A MAIN BOARD, COMPLETE (CND,MX) 4-217-350-11 STOPPER, CORD A-4726-205-A MAIN BOARD, COMPLETE (EA,SP,MY) 4-233-470-01 PANEL, BACK (AEP,UK) A-2007-970-A MAIN BOARD, COMPLETE (AEP,UK) 4-233-470-11 PANEL, BACK (CND,EA,MX)

  • Page 45: Cd Mechanism Deck-1

    HCD-CP300 7-4. CD MECHANISM DECK-1 supplied supplied supplied supplied supplied supplied supplied not supplied Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks 4-228-980-01 SPRING (STOCKER), LEAF 4-228-969-01 SPRING (TABLE), LEAF 4-228-964-01 SLIDER (STOCKER.R) 4-228-974-01 RACK (CENTER) 4-234-423-01 SPRING (STOCKER L), LEAF 4-218-253-71 SCREW (M2.6), +BTTP 4-228-995-01 SPRING (L), TORSION...

  • Page 46: Cd Mechanism Deck-2

    HCD-CP300 7-5. CD MECHANISM DECK-2 supplied not supplied supplied supplied M721 supplied not supplied supplied Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks 4-229-003-01 PULLEY 1-678-457-11 TRAY SENSOR BOARD 4-228-998-01 GEAR (DETECTION) 4-228-988-01 CHASSIS 4-218-253-01 SCREW (M2.6), +BTTP 1-678-460-11 DRIVER BOARD 4-218-253-61 SCREW (M2.6), +BTTP 4-228-976-01 SLIDER (BU.R)

  • Page 47: Electrical Parts List

    HCD-CP300 SECTION 8 ELECTRICAL PARTS LIST NOTE: • RESISTORS • Abbreviation • Due to standardization, replacements in the All resistors are in ohms. CND : Canadian model parts list may be different from the parts METAL: metal-film resistor : Saudi Arabia model specified in the diagrams or the components METAL OXIDE: Metal Oxide-film resistor : Mexican model...
  • Page 48 HCD-CP300 CONTROL Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks R116 1-216-797-11 METAL CHIP 1/16W < DIODE > R117 1-216-821-11 METAL CHIP 1/16W R118 1-216-809-11 METAL CHIP 1/16W D814 8-719-084-70 DIODE SY3318-V-S1-T(CDx) R119 1-216-826-11 METAL CHIP 2.7K 1/16W D815...
  • Page 49 HCD-CP300 CONTROL DISK SENSOR DRIVER IN OUT SW JACK Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks R826 1-216-819-11 METAL CHIP 1/16W < RESISTOR > R827 1-216-821-11 METAL CHIP 1/16W R828 1-216-822-11 METAL CHIP 1.2K 1/16W R751 1-249-407-11 CARBON 1/4W F...
  • Page 50 HCD-CP300 JACK MAIN Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks < JACK > S810 1-786-220-11 KEY BOARD SWITCH(CD1) ************************************************************ PJ301 1-815-577-11 PIN JACK (PHONO) 2P(AUDIO IN MD) A-2007-970-A MAIN BOARD, COMPLETE (AEP,UK) < RESISTOR > ********************* A-4726-203-A MAIN BOARD, COMPLETE (CND,MX) R116...
  • Page 51 HCD-CP300 MAIN Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks C202 1-124-259-11 ELECT 4.7uF 20.00% 16V C340 1-126-965-11 ELECT 22uF 20.00% 50V (AEP,UK) C350 1-162-970-11 CERAMIC CHIP 0.01uF C203 1-126-963-11 ELECT 4.7uF 20.00% 50V C351 1-104-664-11 ELECT 47uF 20.00% 25V C204...
  • Page 52 HCD-CP300 MAIN Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks C823 1-164-185-11 CERAMIC CHIP 13PF 5.00% 50V JR307 1-216-295-00 SHORT 0 (AEP,UK) (AEP,UK) JR308 1-216-295-00 SHORT 0 (AEP,UK) C824 1-164-739-11 CERAMIC CHIP 560PF 5.00% 50V (AEP,UK) <...
  • Page 53 HCD-CP300 MAIN Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks R124 1-216-839-11 METAL CHIP 1/16W R508 1-216-295-00 SHORT 0 (CND,EA,MX,SP,MY) R125 1-216-839-11 METAL CHIP 1/16W R509 1-216-295-00 SHORT 0 (CND,EA,MX,SP,MY) R126 1-216-845-11 METAL CHIP 100K 1/16W R510 1-216-295-00 SHORT 0 (CND,EA,MX,SP,MY)
  • Page 54 HCD-CP300 MAIN Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks R629 1-216-829-11 METAL CHIP 4.7K 1/16W R679 1-216-295-00 SHORT 0 (CND,EA,MX,SP,MY) R630 1-216-829-11 METAL CHIP 4.7K 1/16W R680 1-216-295-00 SHORT 0 (CND,EA,MX,SP,MY) R682 1-216-295-00 SHORT 0 (CND,EA,MX,SP,MY) R632 1-216-295-00 SHORT 0 (CND,EA,MX,SP,MY)
  • Page 55 HCD-CP300 MAIN MOTOR POWER Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks <TERMINAL> D912 8-719-046-07 DIODE 2A02M D913 8-719-046-07 DIODE 2A02M SJ301 1-694-820-11 TERMINAL BOARD D914 8-719-046-07 DIODE 2A02M D915 8-719-109-97 DIODE MTZJ-T-77-6.8C < VIBRATOR > D920 8-719-200-82 DIODE 11ES2-TA1B X801...
  • Page 56 HCD-CP300 TRAY SENSOR Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks C413 1-126-963-11 ELECT 4.7uF 20.00% 50V R422 1-216-831-11 METAL CHIP 6.8K 1/16W C414 1-104-664-11 ELECT 47uF 20.00% 16V R423 1-216-848-11 METAL CHIP 180K 1/16W C415 1-126-963-11 ELECT 4.7uF 20.00% 50V...
  • Page 57 HCD-CP300 Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks MISCELLANEOUS ************** HARDWARE LIST ************** ************** 1-796-078-11 DECK, MECH 1-757-707-11 CABLE, FLEXIBLE FLAT (11 CORE) 7-685-245-19 SCREW +KTP 3X6 TYPE2 NON-SLIT 1-757-705-11 CABLE, FLEXIBLE FLAT (11 CORE) 7-685-246-14 SCREW +KTP 3X8 TYPE2 NON-SLIT X-4953-646-1 PANEL SUB ASSY, FRONT (AEP,UK) 7-685-546-14 SCREW +BTP 3X8 TYPE2 N-S...
  • Page 58 SS-CCP300 SERVICE MANUAL Canadian Model AEP Model Ver 1.0 2001. 04 UK Model E Model • SS-CCP300 is the speaker system in CMT-CP300 Photo: (L-ch) SPECIFICATIONS Speaker system Two-way, bass reflex system Speaker units 13 cm dia., cone type woofer 2.5 cm dia., semi-dome-...
  • Page 59 SS-CCP300 EXPLODED VIEW AND PARTS LIST NOTE: • The mechanical parts with no reference number in the exploded views are not supplied. L-ch Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks X-4953-651-1 NET ASSY, SPEAKER 4-233-481-01 RING, SPEAKER 4-932-425-01 SCREW (3.5X20) 4-233-497-01 BOX (L), SPEAKER 1-544-865-11 SPEAKER (13cm)
  • Page 60 SS-CCP300 MEMO...
  • Page 61 SS-CCP300 REVISION HISTORY Clicking the version allows you to jump to the revised page. Also, clicking the version at the upper right on the revised page allows you to jump to the next revised page. Ver. Date Description of Revision 2001.04...

This manual is also suitable for:

Hcd-cp300Ss-ccp300

Table of Contents