Labeling An Md - Name Function - Sony CMT-CP33MD Operating Instructions Manual

Labeling an MD
— Name Function
You can create titles for your recorded MDs and
tracks as follows.
During recording
If "CD-TEXT" lights up or flashes in the display
during recording a CD, you can record the CD
disc title on the MD (see page 34). However, the
CD disc title is not recorded when recording a CD
on an MD and a tape at the same time.
After recording
Use Name Function on this page. You can input a
total of approximately 1700 characters for the disc
title and track titles on a single MD.
2,3
CURSORT
m
.
4
X
1
`/1
7
CLEAR
5
M
>
4
N
x
1
Press MD to switch the function to MD.
To label a track, press . or >
repeatedly until the desired track number
appears.
2
Press NAME EDIT.
The cursor starts flashing.
3
Press CHARACTER to select the
desired type of character.
Each time you press the button, the display
changes as follows:
(Blank space) t A (Upper cases) t
a (Lower cases) t 0 (Numbers) t
! (Symbols) t
4
Press . or > repeatedly to select
the desired character.
To enter a blank space
Press CURSORt without pressing . or
>. You cannot enter a space as the first
character.
To enter a symbol
You can use the following 24 symbols.
! " # $ % & ' ( )
Cursor
(Blank space) t ...
+ , – . / : ; < = > ? @ _ `
continued
45