1. Manuals
  2. Brands
  3. Sony Manuals
  4. Stereo System
  5. SS-CCP1
  6. Service manual

Sony SS-CCP1 Service Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

SERVICE MANUAL
MICROFILM
9-928-808-11
• CMT-CP1 is composed of following models.
As for the service manual, it is issued for each
component model, then, please refer to it.
COMPONENT MODEL NAME FOR CMT-CP1
AMPLIFIER/CD PLAYER/
TAPE DECK/TUNER
SPEAKER SYSTEM
PARTS LIST(ACCESSORIES & PACKING MATERIALS)
Part No.
Description
1-418-299-11 COMMANDER, STANDARD (RM-SCP1)
1-501-374-11 ANTENNA (LOOP) (AM/MW)
1-501-659-61 ANTENNA (FM) (US, CND)
1-754-060-11 ANTENNA (FM) (EXCEPT US, CND)
3-865-909-11 MANUAL, INSTRUCTION (ENGLISH) (EXCEPT AED)
3-865-909-21 MANUAL, INSTRUCTION (FRENCH, SPANISH) (AEP, MY, SP, TH)
3-865-909-31 MANUAL, INSTRUCTION (DUTCH, GERMAN) (AEP)
3-865-909-41 MANUAL, INSTRUCTION (ITALIAN, PORTUGUESE) (AEP)
3-865-909-51 MANUAL, INSTRUCTION (DANISH, FINNISH, SWEDISH) (AED)
3-865-909-61 MANUAL, INSTRUCTION (POLISH) (AED)
3-865-909-71 MANUAL, INSTRUCTION (CHINESE) (MY, SP, HK)
3-865-909-81 MANUAL, INSTRUCTION (FRENCH) (US, CND)
3-865-909-91 MANUAL, INSTRUCTION (ENGLISH, THAI) (TH)
4-991-151-01 COVER, BATTERY (FOR RM-SCP1)
•Abbreviation
AED : North European
CND : Canadian
HK : Hong Kong
MY : Malaysia
SP
: Singapore
TH
: Thai
MICRO Hi-Fi COMPONENT SYSTEM
Sony Corporation
Home A&V Products Company
CMT-CP1
Canadian Model
Australian Model
CMT-CP1
HCD-CP1
SS-CCP1
Published by Quality Assurance Dept.
US Model
AEP Model
UK Model
E Model
99B001689-1
Printed in Japan ©1999.2
(Shinagawa)

Advertisement

Table of Contents
loading

Related Manuals for Sony SS-CCP1

Summary of Contents for Sony SS-CCP1

  • Page 1 COMPONENT MODEL NAME FOR CMT-CP1 CMT-CP1 AMPLIFIER/CD PLAYER/ HCD-CP1 TAPE DECK/TUNER SPEAKER SYSTEM SS-CCP1 PARTS LIST(ACCESSORIES & PACKING MATERIALS) Part No. Description 1-418-299-11 COMMANDER, STANDARD (RM-SCP1) 1-501-374-11 ANTENNA (LOOP) (AM/MW) 1-501-659-61 ANTENNA (FM) (US, CND)
  • Page 2 HCD-CP1 SERVICE MANUAL US Model Canadian Model AEP Model UK Model E Model Note Australian Model CD block, tape deck block and tuner pack are supplied with the assembled block. HCD-CP1 is the Amplifier, CD player, Tape Deck and Tuner section in CMT-CP1.
  • Page 3 – 2 –...

  • Page 4: Table Of Contents

    SECTION 1 SERVICING NOTES TABLE OF CONTENTS SERVICING NOTES ..........3 NOTES ON HANDLING THE OPTICAL PICK-UP BLOCK OR BASE UNIT GENERAL The laser diode in the optical pick-up block may suffer electro- Location of Controls ............5 static break-down because of the potential difference generated Setting the Time ..............
  • Page 5 SUR LES DIAGRAMMES SCHÉMATIQUES ET LA LISTE DES PIÈCES SONT CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE REMPLACER CES COM- VOLTAGE SELECTOR POSANTS QUE PAR DES PIÈCES SONY DONT LES Switch NUMÉROS SONT DONNÉS DANS CE MANUEL OU DANS LES SUPPLÉMENTS PUBLIÉS PAR SONY.

  • Page 6: General

    SECTION 2 GENERAL LOCATION OF CONTROLS • Front View 1 2 3 4 5 6 TAPE deck Liquid crystal display TAPE P button TAPE 0 button TAPE œ button TAPE 6 button TAPE p button !º !ª TAPE ) button @º...
  • Page 7 This section is extracted from instruction manual. – 6 –...

  • Page 8: Disassembly

    SECTION 3 DISASSEMBLY Note: Follow the disassembly procedure in the numerical order given. COVER (UPPER) 3 cover (upper) 2 four screws (BTP3 × 8) 1 two screws (case3 TP2) 1 two screws (case3 TP2) TAPE MECHANISM DECK 1 flat wire (12 core) 4 tape mechanism deck 3 two screws...
  • Page 9 FRONT PAENL SECTION 2 two flat wires (CN802, 804) 1 connector (CN303) 1 connector 2 flat wire (12 core) 1 connector (CN809) 3 screw (KTP3 × 6) 6 connector (CN603) 5 two claws 7 front panel section 3 screw 4 two screws (KTP3 ×...
  • Page 10 CD MECHANISM DECK 3 two screws (BTP3 × 8) 2 flat wire (19 core) (CN805) 3 two screws (BTP3 × 8) 1 connector 4 CD mechanism deck BU ASS’Y Note: As 3 coil springs are missed easily, treat them carefully. 3 coil spring (rear) 2 washer...
  • Page 11 TRAY 1 two screws (PTPWH2.6 × 7) 2 chucking yoke (K) 6 damper (S) 7 lock lever 4 Pull the tray. 8 Remove the tray. 5 claw 7 lock lever 3 Rotate the control cam in the direction of arrow A . •...

  • Page 12: Service Mode

    SECTION 4 SERVICE MODE [Liquid Crystal Display All Lit Check Mode] [CD Aging Mode] This mode can be used for operation check of CD section. Procedure: 1. Set to standby state. Procedure: [MD/VIDEO] 2. Press three buttons of p (TAPE), p (CD), and 1.

  • Page 13: Electrical Confirmations And Adjustments

    SECTION 5 ELECTRICAL CONFIRMATIONS AND ADJUSTMENTS 2. Turn the adjustment screw and check output peaks. If the peaks DECK SECTION 0 dB=0.775 V do not match for L-CH and R-CH, turn the adjustment screw Note: Confirm each contents of this section first of all. If the results are so that outputs match within 1dB of peak.
  • Page 14 REC Level Confirmation and Adjustment Playback level Confirmation and Adjustment Procedure: Procedure: 1. Mode: Record Mode: Playback MAIN board test tape MD IN jack (PJ301) WS-48B L-CH, R-CH frequency counter (3 kHz, 0 dB) 315 Hz, 50 mV (–23.8 dB) AF OSC blank tape 600 Ω...

  • Page 15: Diagrams

    HCD-CP1 SECTION 6 DIAGRAMS 6-1. BLOCK DIAGRAM – TAPE Section – REC-L (Page 18) DECK PROCESS, RV151 DOLBY NR AMP PLAYBACK IC352 LEVEL (L) DECK A/B PB-L PLAYBACK SELECT DOLBY NR (Page 17) EQ AMP L-CH IC351 CIRCUIT REC/PB REC/PB (Page 19) (RECORD/PLAYBACK) BIAS...

  • Page 16: Block Diagram - Main Section

    HCD-CP1 6-2. BLOCK DIAGRAM – MAIN Section – REC-L PB-L (Page 16) (Page 16) PJ301 (1/2) INPUT SELECT SWITCH, TONE CONTROL, ELECTRICAL VOLUME MD IN IC301 LINE AMP R-CH PJ301 (2/2) IC307 LINE OUT LIN2 MUTING R-CH Q101 LIN1 VIDEO IN MUTING R-CH R-CH...

  • Page 17: Block Diagram - Display/Power Supply Section

    HCD-CP1 6-3. BLOCK DIAGRAM – DISPLAY/POWER SUPPLY Section – REC/PB SYSTEM CONTROLLER, D801, 802 (Page 16) BACK UP +5V LCD DRIVER SYSTEM CONTROLLER (IC801) B+ IC801 (3/3) RESET SIGNAL RESET 38 GENERATOR (EXCEPT Hong Kong, Malaysia, Singapore, Thai) IC803 POWER TRANSFORMER (SUB) REG-CON T902...
  • Page 18 6-4. NOTE FOR PRINTED WIRING BOARDS AND SCHEMATIC DIAGARAMS • Circuit Boards Location Note on Printed Wiring Board: Note on Schematic Diagram: POWER board • X : parts extracted from the component side. • All capacitors are in µF unless otherwise noted. pF: µµF •...

  • Page 19: Printed Wiring Board - Main Section

    HCD-CP1 6-5. PRINTED WIRING BOARD – MAIN Section – • See page 22 for Circuit Boards Location. (Page 33) (Page 33) (Page 37) (Page 33) (Page 33) (Page 41) – 23 – – 24 –...
  • Page 20 HCD-CP1 • Voltages and waveforms are dc with respect to ground under no-signal (detuned) conditions. no mark : FM ) : CD PLAY 6-6. SCHEMATIC DIAGRAM – MAIN Section (1/4) – • See page 35 for IC Block Diagram. ] : TAPE PLAY 〈〈...

  • Page 21: Schematic Diagram - Main Section (1/4)

    HCD-CP1 6-7. SCHEMATIC DIAGRAM – MAIN Section (2/4) – • See page 35 for IC Block Diagrams. (Page 42) (Page (Page 31) (Page 32) • Voltages and waveforms are dc with respect to ground under no-signal (detuned) conditions. no mark : FM ) : CD PLAY ] : TAPE PLAY 〈〈...
  • Page 22 HCD-CP1 6-8. SCHEMATIC DIAGRAM – MAIN Section (3/4) – • See page 34 for Waveforms. (Page 25) (Page 31) (Page 32) • Voltages and waveforms are dc with respect to ground under no-signal conditions. no mark : TAPE PLAY ) : TAPE RECORD –...

  • Page 23: Schematic Diagram - Main Section (2/4)

    HCD-CP1 6-9. SCHEMATIC DIAGRAM – MAIN Section (4/4) – • See page 34 for Waveforms. • See page 36 for IC Block Diagram. (Page 39) (Page 30) (Page 28) (Page 30) (Page 25) (Page 28) (Page 25) (Page 25) • Voltages and waveforms are dc with respect to ground under no-signal (detuned) conditions.

  • Page 24: Printed Wiring Boards - Panel/Cd Loading Section

    HCD-CP1 6-10. PRINTED WIRING BOARDS – PANEL/CD LOADING Section – • Waveforms – MAIN Board – • See page 22 for Circuit Boards Location. 1 Q357, 358 collector (REC mode) 4 IC804 !§ (RCLK) 13.6 Vp-p 4.4 Vp-p 11.6 µ s 840 µ...
  • Page 25 • IC Block Diagrams IC804 BU1924F-E2 (AEP, UK models) – MAIN Board – IC101, 201 TDA7296 12 11 10 THERMAL BIPOLAR SHUTDOWN TRANSCONDACTANCE INPUT STAGE CLOCK TEST MOS GAIN & SHORT – LEVEL SHIFTING OUTPUT CIRCUIT STAGE STAGE PROTECTION PLL 57kHz RDS/ARI 1187.5Hz COMPARATOR...

  • Page 26: Printed Wiring Boards - Control Section

    HCD-CP1 6-11. PRINTED WIRING BOARDS – CONTROL Section – • See page 22 for Circuit Boards Location. (Page 23) • Semiconductor Location Ref. No. Location D851 D852 D853 D854 D855 D856 D857 IC802 Q852 Q853 Q854 Q855 Q856 Q857 Q858 Q859 –...

  • Page 27: Schematic Diagram - Control Section

    HCD-CP1 6-12. SCHEMATIC DIAGRAM – CONTROL Section – (Page 32) • Voltages and waveforms are dc with respect to ground under no-signal (detuned) conditions. no mark : FM – 39 – – 40 –...

  • Page 28: Printed Wiring Board - Power Section

    HCD-CP1 6-13. PRINTED WIRING BOARD – POWER Section – 6-14. SCHEMATIC DIAGRAM – POWER Section – • See page 22 for Circuit Boards Location. (Page (Page 23) The components identified by mark ! or dotted Les composants identifiés par une marque ! sont line with mark ! are critical for safety.

  • Page 29: Ic Pin Function Description

    6-15. IC PIN FUNCTION DESCRIPTION • MAIN BOARD IC801 CXP83124A-130Q (SYSTEM CONTROLLER, LCD DRIVER) Pin No. Pin Name Description TAPE-END Tape end detect sensor input terminal “H” input when the tape end detected Serial data reading clock signal input from the RDS decoder (IC804) RDS-CLK (Used for the AEP and UK models only) REMOCON...
  • Page 30 Pin No. Pin Name Description Power supply on/off control signal output of the tuner pack (+7.5V) and RDS decoder (IC804) RDS-ON (RDS decoder: used for the AEP and UK models only) LED drive signal output of the TUNER indicator (D855) “H”: tuner power on (LED on) HP-CHK Headphone check detection signal input terminal TC-SW...

  • Page 31: Exploded Views

    SECTION 7 EXPLODED VIEWS NOTE: • -XX and -X mean standardized parts, so they • Items marked “*” are not stocked since they The components identified by mark ! or dotted line with mark may have some difference from the original are seldom required for routine service.
  • Page 32 (2) FRONT PANEL SECTION supplied supplied with RV801 supplied Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark X-4951-108-1 KNOB ASSY * 62 4-217-320-01 PLATE, BACK LIGHT X-4951-102-1 PANEL SUB ASSY, FRONT (AEP, UK) (CASSETTE HOLDER BACK LIGHT) X-4951-702-1 PANEL SUB ASSY, FRONT (EXCEPT AEP, UK) X-4951-107-1 LOCK (EJECT) ASSY 4-217-318-01 WINDOW (CASSETTE)
  • Page 33 (3) CHASSIS SECTION US, CND AEP, MY, UK, HK SP, TH KSL-2130CCP/K1N T901 supplied 103 114 supplied supplied supplied supplied The components identified by Les composants identifiés par une mark ! or dotted line with marque ! sont critiques pour la mark ! are critical for safety.
  • Page 34 (4) CD MECHANISM DECK SECTION (KSL-2130CCP/K1N) supplied supplied supplied supplied M901 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark * 151 2-646-290-01 TRAY (2130) 1-452-493-21 MAGNET 2-625-541-02 DAMPER (S) 2-625-286-03 PULLEY, CHUKING 2-625-279-01 SCREW (B 2.6X2.5), + 3-319-501-51 SCREW (+PTPWH) (2.6X16) 2-625-274-02 GEAR, MIDWAY * 162...

  • Page 35: Electrical Parts List

    SECTION 8 CD LIGHT CONTROL ELECTRICAL PARTS LIST NOTE: • Due to standardization, replacements in the • Items marked “*” are not stocked since they The components identified by mark ! or dotted line with mark are seldom required for routine service. parts list may be different from the parts speci- ! are critical for safety.
  • Page 36 CONTROL LOADING MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark S802 1-571-760-11 SWITCH, KEY BOARD (CD, ^) < LED > S803 1-571-760-11 SWITCH, KEY BOARD (CD, p) S804 1-571-760-11 SWITCH, KEY BOARD (CD, + )) D657 8-719-075-51 LED SELS6B14C-LF62 (LCD BACK LIGHT) S805...
  • Page 37 MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C126 1-126-965-11 ELECT 22uF C254 1-104-666-11 ELECT 220uF C127 1-130-495-00 MYLAR 0.1uF C255 1-163-117-00 CERAMIC CHIP 100PF C256 1-130-487-00 MYLAR 0.022uF C128 1-163-005-11 CERAMIC CHIP 470PF C257 1-124-907-11 ELECT 10uF C129...
  • Page 38 MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C363 1-163-021-11 CERAMIC CHIP 0.01uF C364 1-124-907-11 ELECT 10uF D361 8-719-991-33 DIODE 1SS133T-77 D362 8-719-991-33 DIODE 1SS133T-77 C365 1-163-021-11 CERAMIC CHIP 0.01uF D651 8-719-200-82 DIODE 11ES2 C603 1-164-004-11 CERAMIC CHIP 0.1uF D652...
  • Page 39 MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark JR325 1-216-296-00 SHORT Q658 8-729-900-53 TRANSISTOR DTC114EK JR326 1-216-296-00 SHORT JR327 1-216-296-00 SHORT Q659 8-729-900-53 TRANSISTOR DTC114EK JR328 1-216-296-00 SHORT Q661 8-729-040-76 TRANSISTOR KTA1273-Y-AT Q662 8-729-900-53 TRANSISTOR DTC114EK <...
  • Page 40 MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R157 1-216-065-00 RES, CHIP 4.7K 1/10W R309 1-216-041-00 METAL CHIP 1/10W R158 1-216-061-00 METAL CHIP 3.3K 1/10W R310 1-216-073-00 METAL CHIP 1/10W R159 1-216-049-11 RES, CHIP 1/10W R311 1-216-073-00 METAL CHIP 1/10W...
  • Page 41 MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R670 1-216-097-00 RES, CHIP 100K 1/10W R844 1-216-089-00 RES, CHIP 1/10W (AEP, UK) R846 1-216-081-00 METAL CHIP 1/10W R671 1-216-113-00 RES, CHIP 470K 1/10W R847 1-216-073-00 METAL CHIP 1/10W (AEP, UK) R848...
  • Page 42 MAIN POWER Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark RV251 1-241-765-11 RES, ADJ, CARBON 22K D911 8-719-046-07 DIODE 2A02M RV252 1-225-231-21 RES, ADJ, CARBON 4.7K D912 8-719-046-07 DIODE 2A02M RV253 1-241-767-21 RES, ADJ, CARBON 100K D913 8-719-046-07 DIODE 2A02M D914...
  • Page 43 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark ************** HARDWARE LIST ************** 7-685-546-14 SCREW +BTP 3X8 TYPE2 N-S 7-685-245-19 SCREW +KTP 3X6 TYPE2 NON-SLIT 7-685-246-14 SCREW +KTP 3X8 TYPE2 NON-SLIT 7-685-659-14 SCREW +BVTP 4X8 TYPE2 N-S (EXCEPT AEP, UK) 7-685-659-79 SCREW +BVTP 4X8 TYPE2 IT-3 (AEP, UK) 7-685-135-19 SCREW +P 2.6X10 TEPE2 NON-SLIT...
  • Page 44 HCD-CP1 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark Sony Corporation 99B0589-1 Printed in Japan © 1999. 2 9-928-809-11 Home A&V Products Company Published by Quality Assurance Dept. – 58 – (Shinagawa)
  • Page 45 SS-CCP1 SERVICE MANUAL US Model Canadian Model AEP Model UK Morel E Model Australian Model • SS-CCP1 is the speaker system in CMT-CP1 Photo: L-CH SPECIFICATIONS Speaker system 2-way, bass-reflex type Speaker units Woofer: 12 cm dia. cone type Tweeter: 2.5 cm dia.
  • Page 46 4-218-202-01 CATCHER, NET 4-874-614-11 SCREW (4) (3.5X14), TAPPING 1-529-337-11 SPEAKER (12cm) 4-217-365-01 BOX (L), SPEAKER A-4411-718-A TWEETER ASSY (6.7cm) 4-217-366-01 BOX (R), SPEAKER Sony Corporation 99B051689-1 Printed in Japan © 1999. 2 9-928-810-11 Home A&V Products Company Published by Quality Assurance Dept.

This manual is also suitable for:

Hcd-cp1Cmt-cp1

Table of Contents