Sony CMT-CP33MD Operating Instructions Manual page 46

Labeling an MD (continued)
5
Press CURSORt.
The character you selected in step 4 stops
flashing and the cursor shifts to the right.
6
Repeat steps 3 to 5 to complete the
entire title.
If you made a mistake
Press CURSORT or t until the character
you want to change flashes, then repeat steps
3 to 5.
To erase a character
Press CLEAR while the character is flashing.
You cannot insert characters.
7
Press ENTER/YES to complete the
labeling procedure.
The titles you labeled appear sequentially,
and then the original display appears.
To cancel labeling
Press MENU/NO.
Notes
• You can label a track title during play. The
playback repeats until you finish labeling.
• If the MD is record protected, "C11" and
"Protected" appear alternately and the MD cannot
be edited. Remove the MD, then slide the record
protection tab to the closed position (see page 32).
46
Copying a disc or track title
You can copy a labeled disc or track title to use it
as a title of another track or the disc title within a
disc.
1 Press MENU/NO in stop mode.
2 Press . or > repeatedly until "Name ?"
3 Press . or > repeatedly until "Nm
4 Press . or > repeatedly to select "Disc"
Cursor
5 Press . or > repeatedly to select the copy
To cancel copying
Press MENU/NO.
Checking the titles
To check the disc titles, press SCROLL in stop
mode. To check the track title, press SCROLL
during play. The title appears scrolling in the
display. To stop scrolling, press SCROLL. Press
the button again to resume scrolling.
appears, then press ENTER/YES.
Copy ?" appears, then press ENTER/YES.
(when copying the disc title) or the track
number with the title you want to copy, then
press ENTER/YES.
When "No Name" appears
The disc or track has not been labeled.
destination track number or "Disc" (when
copying as the disc title), then press ENTER/
YES.
When "Overwrite ??" appears
The copy destination already has a disc or track
title. To continue and copy the title, press
ENTER/YES.