Sony CMT-CP33MD Operating Instructions Manual page 21

Recording on a tape
You can use TYPE I (normal) or TYPE II (CrO
tape. The recording level is automatically
adjusted.
To turn on the system, press ? /1 (power).
?/1 (power)
7 5
TAPEnN
3,6
DOLBY NR*
* This tape deck is equipped with the Dolby B-type
noise reduction system.
1
Press TAPE Z and insert a blank tape.
With the side you want to
record on facing you
)
2
1
TAPEx
2 4
2
Press TUNER/BAND to select "FM" or
"AM."
3
Press TUNING MODE repeatedly until
"PRESET" appears.
4
Press TUNING + or – to select the
desired preset station.
The preset number scrolls in the display,
followed by the frequency.
Frequency (or station name* or RDS station
name**)
When you preset only one station, "ONE
PRESET" appears in the display.
You can also select the preset numbers with
the number buttons on the remote.
* The station name appears only if you have
labeled the station (see page 63).
** European model only
5
Press TAPE REC z .
The tape deck stands by for recording and
"REC" appears in the display.
6
Press DIRECTION repeatedly until g
appears to record on one side or h (or
j) to record on both sides.
7
Press TAPE X.
Recording starts.
continued
21