Sony CMT-CP33MD Operating Instructions Manual page 64

Labeling the preset stations
(continued)
6
Press . or > on the remote
repeatedly to select the desired
character.
To enter a blank space
Press CURSORt without pressing . or
>. You cannot enter a space as the first
character.
To enter a symbol
You can use the following 24 symbols.
! " # $ % & ' ( )
7
Press CURSORt on the remote.
The character you selected in step 6 stops
flashing and the cursor shifts to the right.
8
Repeat steps 5 to 7 to complete the
entire title.
If you made a mistake
Press CURSORT or t until the character
you want to change flashes, then repeat steps
5 to 7.
To erase a character
Press CLEAR on the remote while the
character is flashing. You cannot insert
characters.
9
Press ENTER/YES on the remote to
complete the labeling procedure.
64
+ , – . / : ; < = > ? @ _ `
Cursor
To cancel labeling
Press MENU/NO on the remote.
To check the preset number and
frequency
The station name appears when you tuned the
labeled station.
To check the preset number and frequency, press
DISPLAY on the remote. The preset number and
frequency appear, followed by the station name.
To erase the station name
1 Perform steps 1 to 4.
2 Press CLEAR on the remote repeatedly to erase
the name.
3 Press ENTER/YES on the remote.