Playing A Song; Monitoring Through Headphones; Closing Serato Dj Pro - Roland Serato Owner's Manual

Playing a Song

1
Set the DJ-707M's knobs and switches as follows.
Input select switches
[MASTER] knob
[TRIM] knob
[BOOTH] knob
[ZONE] knob
[HI], [MID], [LOW] knobs
[FILTER/FX] knob
Channel faders
Cross fader
CROSS FADER [CH 1]–[CH 4] knobs
Press the [ r ] button to play back the loaded song.
2
3
Move the channel fader upward and turn the [TRIM] knob
toward the right to adjust the volume.
Adjust the volume so that the channel level in the level indicator is lit in
the orange-colored area.
4
Turn the [MASTER] knob toward the right to adjust the level of
the speakers.

Closing Serato DJ Pro

1
Close the Serato DJ Pro screen.
Mac OS
In the upper left of the Serato DJ Pro screen, click the [ 6 ] (red: close)
button.
Windows
In the upper right of the Serato DJ Pro screen, click the [X] button.
A confirmation screen appears.
2
Click [Yes] to close Serato DJ Pro.
3
Turn off the power of the equipment that's connected to the
DJ-707M.
4
Press the [POWER] switch.
The display indicates "Are you sure to Power off. "
Are you sure to
Power off [YES]
5
Press the [SELECT (ENTER)] knob to power-off the DJ-707M.
"PC" position
Turned all the way to the left
Center
Lowest position
Center
"THRU" position

Monitoring Through Headphones

1
Set the DJ-707M's knobs as follows.
PHONES [MIXING] knob
PHONES [LEVEL] knob
2
Press the channel [CUE] button of the channel that you want to
monitor.
3
Turn the [VOLUME] knob toward the right to adjust the
headphone level.
Using Serato DJ Pro
Turned all the way to the left
11