Effect Operations; Multi Fx Mode Operations; Single Fx Mode Operations - Roland Serato Owner's Manual

Effect Operations

Serato DJ Pro has two effect units (FX1, FX2) which you can use with the
selected deck.
DJ-FX panel
When you click "FX" in the upper left of Serato DJ Pro's main screen, the
DJ-FX panel opens.
Multi FX mode
You can select up to three effects for each effect unit.
1 1
4 5
4 5
Single FX mode
You can select one effect for each effect unit, and control multiple
parameters of the selected effect.
1
4
5 6 6
1
Currently selected effect type
2
Time at which the effect is applied
3
Number of the deck that uses the effect unit is highlighted
4
Effect on/off status (highlighted when on)
5
Effect depth
6
Effect parameters and settings

Multi FX Mode Operations

1.
In the DJ-FX panel, click
2.
Press the button of the deck (channel) that will use the effect
unit, making the button light.
In the case of deck 3 or 4, hold down the [SHIFT] button and press the
[CH 1] ([CH 2]) button.
In the DJ-FX panel of the Serato DJ Pro screen, the number of the deck
that uses the effect unit is highlighted.
MEMO
By long pressing the [CH 2] button you can apply an effect to the sampler
sound.
In Serato DJ Pro's Sampler panel, set OUTPUT to "A. "
3.
Hold down the [SHIFT] button and press an effect button to
select the effect type.
The effect type changes each time you press the button.
4.
Press the effect button to turn the effect on (button lit).
2 3
1
4 5
2 3
6 6
to select the multi FX mode.
5.
Use the [LEVEL] knob to adjust the effect depth.
6.
Hold down the [SHIFT] button and turn the [LEVEL] knob to
adjust the time at which the effect is applied.

Single FX Mode Operations

1.
In the DJ-FX panel, click
2.
Press the button of the deck (channel) that will use the effect
unit, making the button light.
In the case of deck 3 or 4, hold down the [SHIFT] button and press the
[CH 1] ([CH 2]) button.
In the DJ-FX panel of the Serato DJ Pro screen, the number of the deck
that uses the effect unit is highlighted.
MEMO
By long pressing the [CH 2] button you can apply an effect to the sampler
sound.
In Serato DJ Pro's Sampler panel, set OUTPUT to "A. "
3.
Hold down the [SHIFT] button and press the effect [1] button
to select the effect type.
The effect type changes each time you press the button.
4.
Press the effect [1] button to turn the effect on (button lit).
5.
Press the effect [2] or [3] button to switch the value of the
effect parameters.
6.
Hold down the effect [2] or [3] button and turn the [LEVEL]
knob to adjust the value of the effect parameters.
7.
Use the [LEVEL] knob to adjust the effect depth.
8.
Hold down the [SHIFT] button and turn the [LEVEL] knob to
adjust the time at which the effect is applied.
Operating the DJ-707M
to select the single FX mode.
15