PDF reader installed on your computer. DJ-707M, how to make settings, and the names and functions of the parts. Downloading the DJ-707M Owner’s Manual...
Read the license agreement, and if you accept the conditions, click [Agree]. Downloading the Software The DJ-707M USB driver and Serato DJ Pro are not included in the package. Download them from the Roland or Serato website. Downloading the DJ-707M USB Driver When the following screen appears, click [Close].
PC [A], [B] button Select the computer (one or the other computer connected to the rear panel PC A or B ports) that you want to control from the DJ-707M. The DJ-707M controls the computer whose button is lit. For each of the left and right decks, you can choose the computer that will be controlled.
Page 5
Panel Descriptions Tempo slider [SLICER] button Button illumination: Red Adjusts the playback speed of the song. Selects slicer mode. Jog dial Button illumination: Blue [SHIFT] + [SLICER] Selects slicer loop mode. Controls scratch and pitch bend (playback speed adjustment). Top surface [SAMPLER] button Outer edge Button illumination: Magenta...
Panel Descriptions Mixer Section This is a four-channel mixer. Here you can adjust the sound, connect sounds, and turn headphone cue on/off. Input select switches Select the input source for each channel. CH 1, 2 PHONO The phono level (MM type cartridge) input is the source. LINE The line level input is the source.
Panel Descriptions Effect Section Here you can adjust the effects using two independent effect sections (FX 1, FX 2). [CH1] button [LEVEL] knob Turns FX 1 (FX 2) on/off for deck 1. Adjusts the depth of the effect. [SHIFT] + [CH1] [SHIFT] + [LEVEL] Turns FX 1 (FX 2) on/off for deck 3.
Panel Descriptions Front Panel Microphone Audio player Headphones Keyboard PHONES jacks CROSS FADER [CH 1]–[CH 4] switch Connect headphones here. Specify the output destination of the channels. Stereo 1/4” and stereo miniature plugs are supported. Output to cross fader A. THRU Output directly without passing through the cross fader.
Page 9
Panel Descriptions Rear Panel (Connecting Your Equipment) To prevent malfunction and equipment failure, always turn down the volume, and turn off all the units before making any connections. MIC IN 1, 2 connector PC A, B port Connect your microphone here. Use the included USB cable to connect this port to your computer.
In the [Start] screen or [App View], click the [Serato DJ Pro] icon. Basic Operations in Serato DJ Pro Songs shown in the browser view can be imported into a deck area, and controlled from the DJ-707M. Deck section Waveform panel...
Turn off the power of the equipment that’s connected to the DJ-707M. Press the [POWER] switch. The display indicates “Are you sure to Power off. ” Are you sure to Power off [YES] Press the [SELECT] (ENTER) knob to power-off the DJ-707M.
Placement copyright owner. 5 Roland assumes no liability concerning the restoration of any 5 Depending on the material and temperature of the surface 5 Do not use this product for purposes that could infringe on a stored content that has been lost.