Playing A Song; Monitoring Through Headphones; Closing Serato Dj Intro - Roland DJ-202 Startup Manual

Playing a Song

1.
Set the DJ-202's knobs and switches as follows.
[MASTER LEVEL] knob
[TRIM] knobs
[HI], [MID], [LOW] knobs
[FILTER] knobs
Channel faders
2.
Press the [r] button to play back the loaded song.
3.
Move the channel fader upward and turn the [TRIM] knob
toward the right to adjust the volume.
Adjust the volume so that the channel level indicator is lit as far as the
orange portion.
4.
Turn the [MASTER LEVEL] knob toward the right to adjust the
level of the speakers.

Closing Serato DJ Intro

1.
Close the Serato DJ Intro screen.
Mac OS
In the upper left of the Serato DJ Intro screen, click the [ 6 ] (red: close)
button.
Windows
In the upper right of the Serato DJ Intro screen, click the [X] button.
A confirmation screen appears.
2.
Click [Yes] to close Serato DJ Intro.
3.
Turn off the power of the equipment that's connected to the
DJ-202.
4.
Turn off the power of the computer.
Turned all the way to the left
Center
Lowest position

Monitoring Through Headphones

1.
Set the DJ-202's knobs as follows.
[MIXING] knob
Turned all the way to the left
[PHONES LEVEL] knob
2.
Press the channel [CUE] button of the channel that you want to
monitor.
3.
Turn the [PHONES LEVEL] knob toward the right to adjust the
headphone level.
Using Serato DJ Intro
9