Playing A Midi Device At The Specified Bpm (Synchronizing Bpm And A Midi Device) - Roland DJ-1000 Owner's Manual

Synchronizing a Record or CD with a MIDI Device (BPM Control)
Playing a MIDI Device at the Specified BPM
(Synchronizing BPM and a MIDI Device)
Here's how you can play a connected MIDI device at the specified BPM.
The DJ-1000 transmits timing clock messages (system realtime messages) synchronized
to the BPM value via its MIDI OUT connector. In addition, vou can use [MIDI
CONTROL] to transmit start/stop (system realtime messages).
By connecting the MIDI OUT of the Dj-1000 to a MIDI device that is able to receive
system realtime messages, the MIDI device can be synchronized to the BPM setting of
the D]-1000, and can be started and stopped remotely.
NOTE Set Hie Syne mode of Hie connected MIDI device to SLAVE.
a p
NOTE
A MIDI device that does not receive system realtime messages cannot be synchronized.
2. Press [MIDI CONTROL] to start/stop the MIDI device.
When the button is dark, pressing [MIDI CONTROL] will start the MIDI device, and the
button will light. When the button is lit, pressing it will stop the MIDI device, and the
button will go dark.
EFFECT BAL .
BS
Starting the MIDI Device at Quarter-Note Timing
The MIDI device can be started at precise quarter-note timing.
1. Hold down [TAP (SHIFT)] and press [MIDI CONTROL].
2. The MIDI device will start at the next quarter note after you pressed [MIDI
CONTROL].