Playing A Song; Monitoring Through Headphones; Closing Serato Dj - Roland Serato DJ-505 Startup Manual

Playing a Song

1.
Set the DJ-505's knobs and switches as follows.
[MASTER LEVEL] knob
[TRIM] knobs
[HI], [MID], [LOW] knobs
[FILTER] knobs
Channel faders
Cross fader
[INPUT SELECT] switches
2.
Press the [r] button to play back the loaded song.
3.
Move the channel fader upward and turn the [TRIM] knob
toward the right to adjust the volume.
Adjust the volume so that the channel level in the level indicator is lit in
the orange-colored area.
4.
Turn the [MASTER LEVEL] knob toward the right to adjust the
level of the speakers.

Closing Serato DJ

1.
Close the Serato DJ screen.
Mac OS
In the upper left of the Serato DJ screen, click the [ 6 ] (red: close) button.
Windows
In the upper right of the Serato DJ screen, click the [X] button.
A confirmation screen appears.
2.
Click [Yes] to close Serato DJ.
3.
Turn off the power of the equipment that's connected to the
DJ-505.
4.
Press the [POWER] switch to power-off the DJ-505.
Turned all the way to the left
Center
Lowest position
Center
"PC" position

Monitoring Through Headphones

1.
Set the DJ-505's knobs as follows.
[MIXING] knob
Turned all the way to the left
[VOLUME] knob
2.
Press the channel [CUE] button of the channel that you want to
monitor.
3.
Turn the [VOLUME] knob toward the right to adjust the
headphone level.
Using Serato DJ
11