Table of Contents
Advertisement
10 Robot Accessories
10.1 Wheel Brush Kit
Assemble the wheel brush kit to the inside rear of the
cover behind each rear wheel.
1)
Assemble the wheel brush to the brush holder.
2)
Assemble the brush holder to the inside rear of
the cover behind each rear wheel.
3
2
1
3
1 – Wheel brush
2 – Brush holder
3 – Screw M6 x 16 (10X)
10.2 Groomer Kit
Assemble the groomer kit to the rear guard of the
robot. The rear guard is factory assembled to the
bottom of the robot's chassis.
1)
Assemble the springs to the support bar.
2)
Assemble the groomer support to the rear guard.
4
3
2
1
3
1 – Rear guard plate
2 – Springs (28X)
3 – Screw M6 x 16 (32X)
4 – Groomer support
11 Battery Service and
Installation
SAVE THESE INSTRUCTIONS – This document contains
important safety and operating instructions for the
Lithium-ion battery.
PERSONAL INJURY HAZARD
Failure to follow all instructions listed in this docu-
ment can lead to serious personal injury.
•
Read and understand all instructions prior to
servicing the battery.
RISK OF FIRE, ELECTRIC SHOCK, AND
BURNS
Do not crush, heat above 140 °F (60 °C), incinerate,
short circuit, dismantle, or immerse the battery in
any liquid. Do not charge below 32 °F (0 °C).
•
Refer to the operator's manual for battery re-
cycling instructions. Only use the charger spec-
ified in the technical manual.
R
A
OBOT
CCESSORIES
W
B
K
HEEL
RUSH
IT
67
- Quick Links:
- How the Robot Works
Hide quick links:
Advertisement
Table of Contents
