Rear Lift Cushion Replacement; Front Wheel Replacement; Rear Wheel Replacement - Echo TM-2000 Technical Manual

S P
ERVICE ROCEDURES
R L C R
EAR IFT USHION EPLACEMENT
9.4 Rear Lift Cushion
Replacement
1) Remove the cover.
2) Remove the rear lift cushion.
3) Assemble the new rear lift cushion.
4) Complete the Lift Sensor Service Test.
1 – Rear lift cushion

9.5 Front Wheel Replacement

1) Remove the nut, washer, and wheel from the
axle.
2) Assemble the new wheel to the axle.
60
1
1
1
3) Assemble the washer and nut. Tighten the nut to
7.5 lbf•ft (10 N•m).
1
2
1 – Nut
2 – Washer
3 – Wheel
4 – Axle

9.6 Rear Wheel Replacement

1) Remove the cover.
2) Loosen the wheel nut and remove the rear wheel
assembly and washers from the gear motor
output shaft. Discard the washers. The wheel nut
remains captive with the rear wheel assembly.
3) Place new washers on the gear motor output
shaft. Do not reuse old washers.
4) Apply Loctite® 243 Blue Threadlocker to the inte-
rior threads of the wheel nut. Place the rear
wheel assembly onto the gear motor output
shaft, tighten the nut to 48 lbf•ft (65 N•m).
1 – Wheel nut
2 – Wheel assembly
3
4
2
1