9.9 Cutting Disk Service
SHARP BLADES
Contact with cutting blades can result in cutting of
fingers or hands.
•
Wear protective gloves when handling the ro-
bot.
1)
Rotate the cutting head so the retention screw
aligns with the slot in the guard. Loosen the
retention screw to remove the cutting head.
1
1 – Retention screw
2 – Guard
3 – Cutting head
2)
Remove the retention screw, nut, and washer
from the cutter shaft. Separate the two discs.
2
3
4
1 – Retention screw
2 – Nut
3 – Washer
4 – Cutter shaft
2
3
1
9.10 Blade Replacement
1)
Remove the blades from the upper cutting disc.
Replace the blades, tighten the screws to
1.5 lbf•ft (2 N•m).
3
1 – Screw
2 – Blade
3 – Upper cutting disc
S
P
ERVICE
ROCEDURES
C
D
S
UTTING
ISK
ERVICE
1
2
63