Service Menu - Echo TM-2000 Technical Manual

U R
SING THE OBOT
S M
ERVICE ENU
To unlock the system:
1) Enter the PIN code, then press
wait for a new command to be issued.
7.4.5 LCD Settings
To modify the LCD settings:
1) Press and hold
Setting screen will appear.
2) Press or to change the contrast.
3) Press or to highlight Temperature Auto
Adj. When this option is checked ON, the LCD
contrast is automatically adjusted according to
the ambient temperature. Press
uncheck this option.
4) Press the 9 key to invert the black and white
colors.
5) Press the 0 key to revert to the factory settings.
6) Press to exit the menu.

7.5 Service Menu

7.5.1 Regional Parameters
Use this menu to set the robot time zone and the
language.
To set the time zone:
1) Press .
2) Press the arrow keys to highlight Regional
parameters, then press
30
. The robot will
for three seconds. The LCD
to check or
.
3) Use and
zone.
4) Press to accept the time zone.
5) Press to exit the menu.
To set the language:
1) Press .
2) Press the arrow keys to highlight Regional
parameters, then press
3) Press to highlight Language.
4) Press .
5) Use and
language.
6) Press to accept the language.
7) Press to exit the menu.
7.5.2 Connections
To display the connections screen:
1) Press .
2) The Connections screen will display. Use the
arrow keypad to select an option.
IP address
Select to display the current IP address of the robot,
depending on the mode on which it is operating.
Modes can be mobile, vpn, or WiFi.
Mode
Select to set the mode in which the robot is to operate.
Mode selections are:
to scroll to the required time
.
to highlight the required