5.2
SP1XXX: FEED
1001*
Leading Edge Registration
1 Tray
2 By-pass
3 Duplex Side2
1002*
Side-to-Side Registration
1 Tray 1
2 Tray 2
Tray 3 (Optional PFU
3
Tray 1, or LCT)
Tray 4 (Optional PFU
4
Tray 2)
5 By-pass
6 Duplex Side 2
1003*
Registration Buckle Adjustment
1 Tray 1
2 Tray 2/3/4 By-pass
SM
Adjusts the printing leading edge registration
from each paper feed station using the Trimming
Area Pattern (SP2902 Pattern No. 10).
[+9.0 to –9.0 / +0.0 / 0.1 mm/step]
Use the
key to toggle between + and – before
entering the value.
The specification is 3 ± 2 mm.
See "Replacement and Adjustment - Copy
Adjustment" for details.
Adjusts the printing side-to-side registration from
each paper feed station using the Trimming Area
Pattern (SP2902 Pattern No. 10).
[+9.0 to –9.0 / +0.0 / 0.1 mm/step]
Use the
key to toggle between + and – before
entering the value. The specification is 2 ± 1.5
mm. See "Replacement and Adjustment - Copy
Adjustment" for details.
Adjusts the paper feed clutch timing at
registration. The paper feed clutch timing
determines the amount of paper buckle at
registration. (A larger setting leads to more
buckling.)
[0 to 10 / 5 / 1 mm/step]
5-13
SP1xxx: Feed
D017/D018/D019/D020