Ricoh Aficio MP2550B Service Manual page 805

No Function
RTI/CSI display priority
2
0: RTI 1: CSI
File No. printing
3 0: Enabled
1: Disabled
Action when authorized
reception is enabled but
authorized RTIs/CSIs are not
4 yet programmed
0: All fax reception is disabled
1: Faxes can be received if the
sender has an RTI or CSI
5-7 Not used
No Function
0 Not used
Report printout after an original
1 jam during SAF storage or if the
SAF memory fills up
SM
System Switch 1E (SP No. 1-101-031)
This bit determines which identifier, RTI or CSI,
is displayed on the LCD while the machine is
communicating in G3 non-standard mode.
1: File numbers are not printed on any reports.
If authorized reception is enabled but the user
has stored no acceptable sender RTIs or CSIs,
the machine will not be able to receive any fax
messages.
If the customer wishes to receive messages
from any sender that includes an RTI or CSI,
and to block messages from senders that do
not include an RTI or CSI, change this bit to
"1", then enable Authorized Reception.
Otherwise, keep this bit at "0 (default setting)".
Do not change the settings
System Switch 1F (SP No. 1-101-032)
Do not change the settings.
0: When an original jams, or the SAF memory
overflows during scanning, a report will be
printed.
71
Comments
This setting is effective only when
Automatic Journal printout is enabled
but the machine cannot print the report
(e.g., no paper).
Comments
Bit Switches
D361