Advertisement
How to update the internal firmware
2.1
SOLEO
CHLORINE
®
F I LT R AT I O N ,
P H
28/04/2017 15:23:48
Water temp. :+29.0°C
pH: 7.8 ORP:607mV
Cond:5264uS 3.28g/l
ESC
Home menu > Update menu :
Firmware update
Insert the USB stick and
hold down the
Up key
SOLEO
CHLORINE
®
F I LT R AT I O N ,
P H
28/04/2017 15:23:48
Water temp. :+29.0°C
pH:7.8
ORP:607mV
Cond:5264uS 3.28g/l
ESC
4.4
SOLEO
CHLORINE
®
F I LT R AT I O N ,
P H
28/04/2017 15:23:48
Water temp. :+29.0°C
pH:7.8
ORP:607mV
Cond:5264uS 3.28g/l
ESC
24
1.1 - Unzip the MAJ-Soleo_CL8_vXX.zip file to obtain the Soleo_cl.bin
file.
USB
recognised
1.2 - Copy the soleo.bin file to the main folder of the USB stick format-
ted in FAT 16 or FAT 32.
2.1 - Remove the soft cover, then remove the orange cover
&
O R P
!! DO NOT TOUCH THE ELECTRICAL CONNECTIONS. RISK OF
VALID
ELECTROCUTION! ONLY PROFESSIONALS AUTHORISED TO WORK
WITH LIVE INSTALLATIONS MAY WORK ON THE CONNECTED DEVICE
WITHOUT A SAFETY COVER.
3.1 - Select the update menu
4.1 - Connect the USB cable supplied to the mini USB connector.
4.2 - Connect the USB stick to the end of the USB cable
&
O R P
4.3 - Press on the "up arrow / +" for more than 1 sec.
4.3
4.4 - The red and green indicators light up.
VALID
4.1
4.5 - Wait for the green indicator to remain off for 5 sec.
4.2
5.1 - Disconnect the USB stick (the green indicator lights up)
5.2 - In the main menu at the bottom, under Information, read the
&
O R P
5.2
version no.: X.X and check that it has changed.
VALID
5.3 - Replace the orange safety cover
5.4: Replace the soft cover.
5.1
Advertisement
