Pentair IntelliBrite Installation And User Manual
  1. Manuals
  2. Brands
  3. Pentair Manuals
  4. Lighting Equipment
  5. IntelliBrite
  6. Installation and user manual

Pentair IntelliBrite Installation And User Manual

Underwater pool led color-changing light
Hide thumbs Also See for IntelliBrite:
Table of Contents

Advertisement

Quick Links

See also: User Manual , Installer and User Manual
®
Underwater Pool
LED Color-Changing Light
Installation and User's Guide
IMPORTANT SAFETY INSTRUCTIONS
READ AND FOLLOW ALL INSTRUCTIONS
SAVE THESE INSTRUCTIONS

Advertisement

Table of Contents
loading

Related Manuals for Pentair IntelliBrite

Summary of Contents for Pentair IntelliBrite

  • Page 1 ® Underwater Pool LED Color-Changing Light Installation and User’s Guide IMPORTANT SAFETY INSTRUCTIONS READ AND FOLLOW ALL INSTRUCTIONS SAVE THESE INSTRUCTIONS...
  • Page 2 IntelliBrite®, IntelliTouch®, EasyTouch®, SAm®, and Pentair Water Pool and Spa® are trademarks and/or registered trademarks of Pentair Water Pool and Spa, Inc. and/or its affiliated companies in the United States and/ or other countries. Unless noted, names and brands of others that may be used in this document are not used to indicate an affiliation or endorsement between the proprietors of these names and brands and Pentair Water Pool and Spa, Inc.

  • Page 3: Table Of Contents

    Replacing the IntelliBrite LED light assembly in an existing pool ......4 Before replacing the IntelliBrite LED light fixture ............ 4 Replacing the IntelliBrite LED light fixture after electrical requirements are met ..5 Replacing the IntelliBrite LED light assembly ............6 Using an External Transformer for Multiple IntelliBrite 12 VAC Lights .....

  • Page 4: Important Safety Precautions

    UL to have been produces under UL’s Listing and Follow-Up Service for the associated usage location. CAUTION - The Pentair Water Pool and Spa IntelliBrite LED light fixture must only be used with Pentair Water Pool and Spa fixture housings (niches). If the IntelliBrite LED light fixture is installed into other niches, the installation will not carry U.L.

  • Page 5: Intellibrite Underwater Pool Led Color-Changing Light

    IntelliBrite LED lights can be controlled using a standard wall-mount light switch. Multiple IntelliBrite LED lights can be connected via a junction box to a single switch so that all lights can be switched on and off together. IntelliBrite LED lights are controlled by cycling AC power from a standard wall switch. By turning the switch on and off a specific number of times, the light activates one of the seven light show modes, fixed colors, and enables the “Hold”...

  • Page 6: Saving A Color Mode Or Fixed Color

    Saving a color mode or fixed color When power is switched off to the IntelliBrite lights, the last color show mode or fixed color will be saved. The next time the light is powered on, the previously saved color show mode or fixed color will be displayed. For example, while in “Party Mode”...

  • Page 7: Intellibrite Led Pool Light Installation

    Note: The pool or spa electrical system can be verified with a Pool and Spa Electrical Qualification Test Kit. The test kit is available from Pentair Water Pool and Spa, Inc. The electrical system inspection using this kit must be performed by trained and certified personnel.

  • Page 8: Replacing The Intellibrite Led Light Assembly In An Existing Pool

    Note: The pool or spa electrical system can be verified with a Pool and Spa Electrical Qualification Test Kit. The test kit is available from Pentair Water Pool and Spa. The electrical system inspection using this kit must be performed by trained and certified personnel.

  • Page 9: Replacing The Intellibrite Led Light Fixture After Electrical Requirements Are Met

    2. To remove light fixture assembly from the pool. Remove the special bronze pilot screw at top of face ring. Remove the IntelliBrite light assembly from the niche and place it on the deck (see page 6 for removal instructions).

  • Page 10: Replacing The Intellibrite Led Light Assembly

    1. Turn off main electrical switch or circuit breaker, as well as the switch which operates the IntelliBrite LED underwater light itself. 2. Before starting make sure that you have a new lens gasket (P/N 79101600) and a IntelliBrite LED pool light assembly ready to install.
  • Page 11 4. Using a ¼" nut driver and a #3 Phillips screwdriver, remove the nut uni-tension wire clamp. Place the nut aside for reinstallation. 5. Remove the face ring and wire clamp from the light housing. Spring clamp: Remove nut and screw 6.
  • Page 12 11. Connect the IntelliBrite LED light plug to the connector in the light housing. Lower the LED light assembly into the light housing. Be sure that there are no wires caught between the housing and the back of the light assembly.
  • Page 13 Pilot Screw between the lock levers. 18. Before powering on the IntelliBrite LED light, be sure the IntelliBrite LED light is completely submerged in the water. The light should never be powered on out of the water for more than 10 seconds.

  • Page 14: Using An External Transformer For Multiple Intellibrite 12 Vac Lights

    When using multiple IntelliBrite 12 VAC LED lights on a 300 Watt transformer, it is recommended that no more than two (2) IntelliBrite pool lights and one (1) IntelliBrite Spa light be used. It is also recommended not to exceed 100 feet of total cable run between the transformer and light (see diagram below).

  • Page 15: Intellibrite Pool Light Replacement Kit Part Numbers

    Pilot screw, with captive gum washer 79101600 - Gasket, 8-3/8 in. diameter, off white Note: A 120 VAC to 12 VAC external transformer is required for the 12 VAC model IntelliBrite LED Pool light. See page 1 for more information.
  • Page 16 *619675* P/N 619675 - Rev B...

Table of Contents