5.3
Housing
The housing is designed as a multipiece. It is of torsionally rigid design and due to its shape imparts very
favourable noise and temperature characteristics.
The gearunit housing comes with the following equipment:
─ Lifting eyes (adequately dimensioned for transport)
─ Inspection cover (for oil filling and/or inspection)
─ Dipstick with MIN and MAX marks (for checking the oil level)
─ Oildrain plug and/or oildrain cock (to drain the oil)
─ Air filter or wetair filter (for aeration and ventilation)
Colour codes for bleeding, oil inlet, oil level and oil drainage:
Air-relief point
Oil-filling point
Oil level:
Dipstick
yellow
Oil-drain point
yellow
Lubricating point
red
BA 5080 en 06/2014
28 / 72
white
red