Table of Contents
Advertisement
Legal notes
Warning note concept
This manual comprises notes which must be observed for your personal safety and for preventing material
damage. Notes for your personal safety are marked with a warning triangle, those only for preventing
material damage appear without a warning triangle. Depending on the level of hazard, the warning notes
are shown in reverse order of seriousness, as follows.
DANGER
means, that death or serious injury will result, if the appropriate preventive action is not taken.
WARNING
means that death or serious injury may result, if the appropriate preventive action is not taken.
CAUTION
means that a slight injury may result, if the appropriate preventive action is not taken.
NOTICE
means that material damage may result, if the appropriate preventive action is not taken.
Where there is more than one hazard level, the warning note for whichever hazard is the most serious is
always used. If in a warning note a warning triangle is used to warn of possible personal injury, a warning
of material damage may be added to the same warning note.
Qualified personnel
The product or system to which this documentation relates may be handled only by persons qualified for
the work concerned and in accordance with the documentation relating to the work concerned, particularly
the safety and warning notes contained in those documents.
Qualified personnel must be specially trained and have the experience necessary to recognise risks
associated with these products and to avoid possible hazards.
Proper use of Siemens products
Observe also the following:
WARNING
Siemens products must be used only for the applications provided for in the catalogue and the relevant
technical documentation. If products and components of other makes are used, they must be
recommended or approved by Siemens. The faultfree, safe operation of the products calls for proper
transport, proper storage, erection, assembly, installation, startup, operation and maintenance. The
permissible ambient conditions must be adhered to. Notes in the relevant documentations must be
observed.
Trademarks
All designations to which the registered industrial property mark ® is appended are registered trademarks
of Siemens AG. Other designations used in this document may be trademarks the use of which by third
parties for their own purposes may infringe holders' rights.
Exclusion of liability
We have checked the content of the document for compliance with the hard and software described.
Nevertheless, variances may occur, and so we can offer no warranty for complete agreement. The
information given in this document is regularly checked, and any necessary corrections are included in
subsequent editions.
BA 5080 en 06/2014
3 / 72
Advertisement
Table of Contents
