Table of Contents
Advertisement
6.3.1.2 Fitting the hydraulic cylinder
If the hydraulic cylinder is not part of the delivery by Siemens, the cylinder must be fitted in mounting
position prior to setting upright and prior to fitting the drive unit. To do so the transport lock must be
removed.
WARNING
Serious injury
Risk of injury through slippage of the insert shaft.
The insert shaft is no longer secured and may slip away if incorrectly stored.
•
Remove hexagon nut (1) from the threaded rod (2).
5
Fig. 11: Fitting the hydraulic cylinder
1
Hexagon nut
2
Threaded rod
3
Bolt
4
Sealing plate
5
Intermediate cover
6
Sealing ring
3
2
1
4
BA 5080 en 06/2014
8
9
11
5
12
7
7
Hydraulic cylinder
8
Insert shaft
9
Threaded flange
10
Set screw
11
Stroke-mounting flange
12
Bolt
34 / 72
10
3
6
Advertisement
Table of Contents
